Up for Sale:

Aspect Laser Aurora 25" Span CNC Cut RC Radio-Controlled 6 MM MAF Foam Airplane Kit F-4

This is the kit only.  Airframe, carbon and hardware, no electronics.  

The.  Aurora was designed to be an Arena flyer with outside capabilities.  I have flown the Aurora in 15 + Mph winds and she did surprisingly well.  I have always liked the “Delta” shaped wings and have had a lot of fun flying mine.  I would suggest the Aurora for a modeler that has flown a fair amount and built a few planes before.  This is not the best first plane, building wise you could pull it off but flight skill wise you should be an intermediate flyer.  She is pretty fast and rolls very well.  You will need a radio that has Delta Mixing for the Elevons.

 

Specifications:

Wing Span –25."

Wing area – 160 Sq. In

Weight 6.5to 8ounces (Typical prototype 7 oz.)

 

The (NOT INCLUDED) PPK-1 is perfect for this plane.  The PPK-1 pack (available from Ebay & Aspect) includes the motor, esc and prop all set to go, available from Aspect Laser.

 

Motor - Sunny Sky 2300 KV brush-less, approx. 125 watts

Prop -  5” X 4” three blade

ESC - 15-20 amp Electronic Speed Control with Battery Eliminator Circuit (BEC)

You would also need:

Battery - 3S 600 MAH Lithium Polymer

Servos – Two 9g micro servos (elevons).  

Receiver – light 4 channel

1 – 6” Extension

 

Some unique features are:

Model Aircraft Foam Construction. 3mm Carbon fiber reinforced wing.

CNC Cut in US by Scott at Mega Jets

Tab and notch construction, self aligning quick building.

Laser Cut 1/32" Plywood firewall, fuselage stiffener, horns and canopy outline.

Wide flight envelope

Large surfaces allow aerobatics and good slow speed characteristics.

Please see photos, thanks for looking. 

Kit will be sent thru UPS Outside Continental US shipping higher.  The $5.00 I like to think of as a "Shared" shipping.  Helps take the sting out on our end.

I try to take many photos for your review. If something is not answered, please feel free to email me with any questions. 

Thanks, 

John