Control4 8-Channel 0-10V Dimmer (C4-DIN-8TV-E) The Control4 8-Channel 0-10V Dimmer controls up to eight 0-10V dimmable fluorescent ballasts or LEDs. Each channel can control up to 50 ballasts. Individual 0-10V lights can be programmatically tied to a corresponding channel on a Control4 8-Channel Relay module for on/off control of the ballast or LED when needed. Alternatively, the Control4 8-Channel 0-10V Dimmer module also has eight low voltage outputs for triggering external power relays. • Controls up to eight 0-10V dimmable fluorescent ballasts or LEDs. • Sink up to 100mA per channel for control of up to 50 ballasts or source up to 25mA per channel for control of up to 12 ballasts. • Eight low-voltage outputs for triggering external power relays. • Channel buttons allow for toggling on/off or ramping up/down a load. • Channel status LEDs indicate whether a load is on or off. • Module override button allows toggling between the module override scene and all channels off or setting the module override scene to current channel levels. • Module status LED indicates if module power is on with normal operation or off. • Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control system is installed or in case the controller malfunctions. • The module can be installed in either a Control4 5-slot or 2-slot panel or in a third-party DIN rail panel