PLEASE STATE RACING STRIPE COLOURS
& SEND ME A EBAY MESSAGE.
We
recommend that you consult your local sign making fitting company, But
you can install these graphics yourself. If unsure of your
fitting capabilities we recommend that you watch youtube fitting guides.
Applying
your vinyl Graphics ensure the surface is clean and free from dust or
grease. Graphics are suitable for dry or wet application method. We
cannot be held responsible for incorrectly or badly installed products.
I.e trapped air bubbles, or ripping of the vinyl if you do not take your
time when installing your product.
Application Instructions For Decals
Follow These 7 Easy Steps
1. Place design face up on a flat
surface and with the plastic card rub over the graphic ensuring the
entire graphic has adhered to the application tape.
2. Turn over the graphic face down
and begin to peel away the backing paper slowly ensuring the graphic is
stuck to the application tape. Carefully replace wax paper and refer to
step 1 if the graphic is still stuck to the wax paper.
3. With the wax paper now removed
ensure the application surface is clean and dry before continuing. A
generic glass cleaning spray will do the job great, wipe clean and dry
with a lint free cloth.
4. Carefully line up your graphic on
to your chosen location ensuring no pressure is applied to the graphic
itself until you are happy. For large graphics it is recommended that
the chosen location is marked out before application.
5. Using the plastic card apply
pressure to the graphic starting from the middle and work outwards
smoothing out any creases or air bubbles as you go.
6. Starting at one corner gently pull
away the application tape at 180 degrees to the graphic ensuring the
graphic has stuck, if not replace application tape and rub over until it
adheres.
7. Finally check your graphic for any
air bubbles present, if there are use a pin or a needle and gently
prick the bubble and apply light pressure to remove it.