5-In-1 HC, CO, CO2, O2 and NOx Gasoline Car Automobile Exhaust Gas Analyzer With Printer
New
Can only be used for gasoline vehicles, not for diesel vehicles.
Description:
Used to measure vehicle emissions of HC, CO, CO2, O2 and NOx gas concentration, automatic calculation shows that air-fuel ratio λ, can be the engine combustion performance and emissions of pollution in a comprehensive test.
Use of advanced technology, with a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer(or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, Multi-mode measurement, with convenient operation, accurate measurement data, work stable and reliable characteristics.
Main Technical Parameters:
Measuring range: HC: 0~10000×10-6(ppm)vol,CO: 0~10×10-2(%)vol )
CO2: 0~20×10-2(%)vol, O2: 0~25×10-2(%)vol
NOx: 0~5000×10-6(ppm)vol,
R.M.P: 0~9999r.m.p OIL TEMP:0~150℃
Lambda: 0.50~3.00 COcor:0~10×10-2(%)vol
Indicating error: HC±12×10-6(ppm)vol ( absolute error ) or±5% ( relative error )
CO±0.06×10-2(%)vol ( absolute error ) or±5% ( relative error )
CO2±0.5×10-2(%)vol ( absolute error ) or±5% ( relative error )
O2±0.1×10-2(%)vol ( absolute error ) or±5% ( relative error )
NOx±25×10-6 (ppm)vol ( absolute error ) or±4% ( relative error )
Stability: moment drift ≤ ±3%
Repeatability: ≤ ±2%
Resolution: HC:1×10-6(ppm)vol, CO: 0.01×10-2(%)vol,CO2: 0.1×10-2(%)vol,
O2: 0.01×10-2(%)vol, NOx: 1×10-6(ppm)vol, Lambda: 0.01,
R.P.M:10r.p.m, OIL TEMP:0.1℃
Response time: 95% response is not more than 10 seconds
Preheating time: 8min (preheating 3min emergency detection)
Output mode: digital direct reading, gases can be attached printer name, the maximum concentration, test time, date. Can interface with computer networking.
And-use temperature: -5~50°C, Relative humidity: ≤90%
Power: AC100~240V 50/60Hz or DC12V( Add power inverter)
Power consumption: 40VA
Dimension: 420 (L )×310(W)×170(H)mm
Weight: 9kg