70903 NEM652 2A DCC Locomotive Decoder With Susi, 8 Outputs, Beam, Rangiergang

Description

• The decoder has a total of 8 outputs + motor output for which more than 20 effects (neon, time functions, fade in+out and much more) as well as dimming can be set independently for each output.
• The decoder fits perfectly into all H0 locomotives. In addition, the decoder has built-in functions for high beam, shunting light as well as shunting gear and pendulum function
• The decoder has a buffer circuit and SUSI connection for sound modules
• The decoder has an adjustable load control which is already optimized for H0 locomotives
• The decoder has 1.5A (2A peak) motor stage
• The decoder has RailCom* and Break-On-DC
• Operation is only possible with DCC and Motorola.
• 100% quality control of all decoders
  Development and production in Germany
  We only use components from well-known brand manufacturers
• Ideal for H0 gauge

TENSION

• BUILD UP
  • 7-24V TRACK VOLTAGE
  The decoder is supplied directly by the track voltage. No separate power supply can be connected.
• PERFOMANCE
  • 1.5A (2A peak) on the motor
  • 0.5A per function output - All outputs max 1A
    
  • 3A total load capacity
• REQUIREMENT
  • QUIET CURRENT UNDER 20MA
  The decoder requires less than 20mA in idle mode when no outputs are switched on

COUPLING

• ARTIFICIAL INTELLIGENCE At least a little bit. The decoder has an automatically adaptive load control which adapts dynamically to the driving behavior. However, it can also be configured as desired.
• INDIVIDUALLY The decoder can be assigned an individual address. The address can be freely chosen.
• REMOTE CONTROL The decoder can be configured directly at its place of use from a DCC central unit using Programming-on-Main. All CVs can be updated.
• INSPECTION The decoder can be configured on a DCC programming track. All CVs can be read and written via direct mode if a motor is connected.

CONFIGURATION

• By default, the output is set to continuous operation without function
• You can dim each output individually or assign an effect of your choice.
• There are also over 20 special effects such as time functions available, including blinking and monoflop functions

INSTALLATION

• CONNECTIONS High quality solder connections for all outputs
• DIMENSIONS 14x24mm, 4mm high

*RailCom is a registered trademark of Lenz Elektronik GmbH in Giessen.