Product Details

• 【Fingerprint Identification】:Smart fingerprint door lock recognizes your fingerprint in just 0.5 second ,keyless entry door with one touch
• 【2 ways to unlock】:Fingerprint unlock leads to a convenient life and Mechanical key as back up or use in emergency when batteries run out
• 【Humanized design】:Max 30 group fingerprints, Low battery alert with red LED 5times flash, USB emergency power port(USB cable included），adjustable door handle for left or right door, auto-lock and normal-open modes , just feel at ease to use Foxgard smart door handle
• 【DIY installation】:Fits most standard single-cylinder US doors. The simple installation takes minutes with a screwdriver(included). No extra drilling. Door thickness: between1-3/8"(35mm) to2-3/16"(55mm), adjustable latch2-3/8"(60mm)or 2-3/4"(70mm).Check your door size before purchase
• 【Buy with Confidence 】: Your satisfaction is our greatest joy. We not only provide detailed installation guide and clear user instruction but also 12 months warranty and free life-time technical support. If you have any questions , please feel free to contact Foxgard customer service

What’s Included:

.Front handle

.Back handle

.Single latch

.Strike plate

.2 Keys

.Square cotter

.2 Spiral tubes

.Screws

Specifications:

Material: Zinc Alloy

Applicable door thickness: 1-3/8" to 2-3/16" (35mm to 55mm)

Latch backset: 2-3/8" or 2-3/4" (60mm or 70mm)

Unlock Method: Fingerprint, Mechanical Key

Fingerprint Reader: Semiconductor

Maximum Supported Fingerprints:30pcs

Support Left /Right-handed door: Yes

Powered by:4pcs AAA batteries (not included)

Foxgard has always been committed to providing smart and humanized products.

WARM TIPS

1.Why any fingers can unlock the door after registered the fingerprint?

Tips:If you can unlock the door with any fingers that mean you do not enroll your fingerprint sucessfully, and then you need to register it again following the user guide or video.

2.How can I know that my fingerprint has been entered successfully?

Tips:After registered your first fingerprint, please do use the unregistered fingerprint to check if it can be unlocked or not, if yes, that mean you do not register the fingerprint sucessfully and need to register it again following the user guide or video.

3.What is the normal-on Mode or which scenes are suitable for this mode?

Tips: If a place needs frequent entry and exit such as offices, you can turn on the normally-on mode during working hours and then no need to register the fingerprints for everyone who enters your office, just press down the biometric door handle. If you don’t want other people to enter your office at will or after getting off work hours, you can turn off this mode immediately.

Important note: Pls do register the admin fingerprint firstly and then you can use this mode!

4.How to adjust the handle direction for left or right-handed doors?

Tips: Please refer to the video we had uploaded under "Customer questions & answers" on store page.

5.How to make the fingerprint reader in the best working condition?

Tips#1: Please enter the fingerprint position correctly. We recommend that you try to enter the more concentrated part of the fingerprint, such as the middle or a little bit front the middle of the fingerprint, so that the fingerprint sensor can better identify your fingerprint;

Tips#2: Please place the finger flat on the center of the fingeprint reader for better recognition;

Tips#3: Please keep the finger dry or clean. Wet, oily or dirty finger will cause verification problems.