60W 18V Mono Solar Panel

Features:
1.Equipped with 12V DC5.5x2.1 & 5V USB output interface.
2.Dedicated for 12V battery and 5V device charging.
3.EVA+PET at front panel, flexible, light-weight but durable.
4.Mono-crystalline solar Cell with efficient up to 21%.
5.4x eyelet and free 2x carabiners for mounting more conveniently.
6.IP65 waterproof, suitable for outdoor using in light rain.
7.Well package with sponge mat and corner protectors.

Specification for the Panel:
Vpmax: 18V
JUnction Box: 1xDC + 1x 2USB
Cells: Monocrystalline
Efficiency: 21%
Material: EVA + PET
DC Cable Length: 100mm

Application:
1.It can be used as an alternative charger for cars, trucks, caravans, boats, motorcycles, RV batteries or any 12V lead-acid batteries.
2.Also for emergency lights, advertising lights, traffic lights, electric fans, solar pumps that`re equipped with a DC or USB interface.

80W
Pmax:80W  (Use power can reach Ablout 30W )  
Max USB Output: 5V 3000mA
Max DC5.5x2.1 Output: 12V 2800ma

CAUTION:
1.The Junction Box is mounted on the Back! So it`s not suitable to be glued on the roof of the vehicle.
2.DO NOT have the positive and negative anodes of the alligator clip to touch or connect to each other, or it will cause short circuit and burning.
3.Don`t bend it over 10° though it`s flexible coz it`s small size!
4.Don`t place the junction box side under heavy rain coz it`s only IP65 waterproof!

---

Controller Specifications:
100% brand new and high quality.
Rated Voltage: 12V 24V Auto
Application: Solar System Controller
Current: 10A/20A/30A/40A/50A/60A
Size: 150*78*35mm
With Timer and light sensor,it could work for solar light system.
Only For off-Grid PV Solar System.
For 10A 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 10A 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage

Safety Instructions:
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL
it is not suited for nickel metal hydride, lithium ions or other batteries.
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

Features:
1.Build-in industrial micro controller.
2.One-key setting,digital display,auto memory function.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections
5.Dual mosfet Reverse current protections ,low heat productions.

System Connection:
1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!

Note:
Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

 

 

 

Package include:
-Without Controller Package Includes:
1 x Solar panels
1 x car charger
1 x alligator clip
2 x hanging buckle
4 x suction cup

-With Controller Package Includes:
1 x Solar panels
1 x car charger
1 x alligator clip
2 x hanging buckle
4 x suction cup
1x Solar panels Battery Charge Controller (10A-60A Depend on your choice)
1 x User Manual