- Bearing Only
 
GEK-T PTFE Lined Series Bearings

Carbon Steel Body, Hard Chrome Plated Ball

McGill GEK-T PTFE Lined Series Bearings have 3 components; the ball, the liner and the outer race. The ball is inserted into the body and the body is then swaged around the ball to lock it in and it is then loosened to allow it to move. The body is made from Carbon Steel, the ball is hard chrome plated. These bearings are ideal for use in areas which require a tight fitted ball. These bearings are ideal for use in areas where the joint is constantly in motion as the liner insures the ball moves freely without any knocking or play being induced. These are commonly used in motorsport and on industrial equipment. These joints do not require lubrication.

BALL:  52100 Bearing Steel ~ Heat Treated ~ Hard Chrome Plated ~ Precision Ground

LINER: PTFE Liner between Ball and Body

BODY:  Carbon Steel ~ Heat Treated ~ Protective Coated for Corrosion Resistance

EXCLUSIVE FEATURES:  Cost Effective ~ PTFE Lined ~ Free UK 1st Class Postage

GEK18T

GEK18PC

GEG20C 
 
 M20 Spherical Plain Bearing, ID 20mm Hole/Bore, OD 42mm, Teflon Lined (GEK20T)

 

BALL:  52100 Bearing Steel ~ Heat Treated ~ Hard Chrome Plated ~ Precision Ground

LINER: Teflon Liner between Ball and Body

BODY:  Carbon Steel ~ Heat Treated ~ Protective Coated for Corrosion Resistance

EXCLUSIVE FEATURES:  Cost Effective ~ Teflon Lined ~ Maintenance Free ~ Free UK 1st Class Postage

Bore Hole: 20mm ~ Outer Diameter: 42mm ~ Width of the Ball: 25mm ~ Width of the Casing: 16mm ~ Misalignment Angle: 15 degrees

Radial Static Load : 127 KN

 

 

+ Housing & Circlip

Machined Housing for Spherical Bearing

(Compatible with GEK-T/GEG-C Bearings)

*These items are designed for use in oval racing, these are not a press fitting and are therefore unsuitable for rally and road applications*

McGill COM spherical bearing housings have been manufactured on a state of the art latest technology 4 axis lathe to an extremely high standard. These are designed specifically for our range of imperial sized bearings. These are commonly used in motorsport and on industrial equipment. Our spherical bearing housings have been manufactured on a state of the art, latest technology, 4 axis lathe to an extremely high standard. These are designed specifically for our range of imperial sized bearings. Retaining circlips are stocked to accompany these sizes.

MATERIAL:  Mild Steel, Suitable for Welding ~ Zinc Coated for Corrosion Resistance

COMPATIBLE WITH:  GEK-T/GEG-C Spherical Bearings

DESIGN:  Machined to be Within Excellent Tolerances to Ensure an Excellent Fit for the Bearing 

EXCLUSIVE FEATURES:  Cost Effective ~ Free UK 1st Class Postage

 

 

 

Internal Circlip

(Compatible with GEK-T/GEG-C Bearings)

McGill retaining circlips have been stamped out of sheet metal. These are designed for use with our range of imperial sized bearings and housings. These are commonly used in motorsport and on industrial equipment.

 COMPATIBLE WITH:  GEK-T/GEG-C Spherical Bearings

DESIGN:  Stamped Out of Sheetmetal, Semi-Flexible to Allow Insertion/Removal 

EXCLUSIVE FEATURES:  Cost Effective ~ Free UK 1st Class Postage

 

Circlip can be installed/removed with the use of circlip pliers. These circlips have been designed to hold our 1/2" bearing into the housing. A bearing slots into the housing and the circlip holds it in place.
 
*Please note: Care should be taken to ensure that the lipped section is acting in the direction against the main force attempting to pull the bearing out when the vehicle is in use. The circlip is only in place to prevent lateral movement and to hold the self weight of the bearing.*
 
 
Ideal for Motorsport, Industrial or Marine Applications.

To complement these circlips, we have a range of other products available in our online store.

McGill GEK-T PTFE Lined Series Bearings have 3 components; the ball, the liner and the outer race. The ball is inserted into the body and the body is then swaged around the ball to lock it in and it is then loosened to allow it to move. The body is made from Carbon Steel, the ball is hard chrome plated. These bearings are ideal for use in areas which require a tight fitted ball. These bearings are ideal for use in areas where the joint is constantly in motion as the liner insures the ball moves freely without any knocking or play being induced. These are commonly used in motorsport and on industrial equipment. These joints do not require lubrication. McGill COM spherical bearing housings have been manufactured on a state of the art latest technology 4 axis lathe to an extremely high standa