ESP32-CAM-MB WIFI Bluetooth Development Board With OV2640 Camera CH340G Module

Popular

    Product Introduction

    Features
    1.The module is a small size camera module that can work independently as the smallest system.
    2.A new WiFi + Bluetooth dual-mode development board based on ESP32 design with on-board PCB antenna.
    3.ESP32-CAM is an 802.11b/g/n Wi-Fi + BT/BLE SoC module, ultra-low power consumption, deep sleep current as low as 6mA, so it is suitable for IoT occasions with high power consumption requirements.
    4. Easy to use, ESP32-CAM is a miniature module with camera function, equipped with OV2640 camera, GPIO for connecting peripherals, and micro-SD card for storing captured images, which can be used by directly plugging into the baseboard.
    5.ESP32-CAM can be widely used in a variety of IoT applications, suitable for home smart devices, industrial wireless control, wireless positioning system signals and other IoT applications, is the ideal solution for IoT applications.
     
    Specification
    Operating voltage: 4.75-5.25V, 5V recommended
    SPIFlash: default 32mbit
    RAM: Internal 520KB
    Wi-Fi: 802.11b / G / n / e / i
    Bluetooth: Bluetooth 4.2BR/EDR and BLE standards
    Support interface (2Mbps): UART, SPI, I2C, PWM
    TF card support: Maximum 4G
    IO ports: 9
    Serial Port Rate: Default 115200bps
    Spectrum Range: 2400 ~ 2483.5 MHz
    Antenna Shape: Integrated PCB, 2dBi gain
    Image output format: JPEG (only support OV2640), BMP, GRAYSCALE
    Transmit power:
    802.11b: 17 ± 2dBm (@ 11mbps)
    802.11g: 14 ± 2dBm (@ 54mbps)
    802.11n: 13 ± 2dBm (@ MCS7)
    Receive sensitivity:
    CCK, 1mbps: -90dBm
    CCK, 11mbps: -85dBm
    6Mbps (1 / 2BPSK): -88dBm
    54Mbps (3/464-QAM): -70dBm
    MCS7 (65Mbps, 72.2 Mbps): -67dBm
    Power consumption:
    Flash off: 180mA @ 5V
    Flash on and brightness set to maximum: 310mA @ 5V.
    Deep sleep: up to 6mA @ 5V minimum.
    Moderm sleep: 20mA @ 5V minimum.
    Light sleep: up to 6.7mA @ 5V minimum.
    Security: VPA/VPA2/VPA2-Enterprise/VPS
    Operating temperature: -20℃～70
    Storage environment: -40℃～125℃, <90% RH
    Applications:
    Smart home device mapping
    Wireless Surveillance
    Intelligent agriculture
    Wireless two-dimensional code recognition
    Wireless positioning system signaling
    and other IoT applications
     
    List
    1 x Development Board
    1 x Camera
    1 x Base (optional)
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    ESP32-CAM-MB WIFI Bluetooth Development Board With OV2640 Camera CH340G Module

    Product Introduction

    Features
    1.The module is a small size camera module that can work independently as the smallest system.
    2.A new WiFi + Bluetooth dual-mode development board based on ESP32 design with on-board PCB antenna.
    3.ESP32-CAM is an 802.11b/g/n Wi-Fi + BT/BLE SoC module, ultra-low power consumption, deep sleep current as low as 6mA, so it is suitable for IoT occasions with high power consumption requirements.
    4. Easy to use, ESP32-CAM is a miniature module with camera function, equipped with OV2640 camera, GPIO for connecting peripherals, and micro-SD card for storing captured images, which can be used by directly plugging into the baseboard.
    5.ESP32-CAM can be widely used in a variety of IoT applications, suitable for home smart devices, industrial wireless control, wireless positioning system signals and other IoT applications, is the ideal solution for IoT applications.
     
    Specification
    Operating voltage: 4.75-5.25V, 5V recommended
    SPIFlash: default 32mbit
    RAM: Internal 520KB
    Wi-Fi: 802.11b / G / n / e / i
    Bluetooth: Bluetooth 4.2BR/EDR and BLE standards
    Support interface (2Mbps): UART, SPI, I2C, PWM
    TF card support: Maximum 4G
    IO ports: 9
    Serial Port Rate: Default 115200bps
    Spectrum Range: 2400 ~ 2483.5 MHz
    Antenna Shape: Integrated PCB, 2dBi gain
    Image output format: JPEG (only support OV2640), BMP, GRAYSCALE
    Transmit power:
    802.11b: 17 ± 2dBm (@ 11mbps)
    802.11g: 14 ± 2dBm (@ 54mbps)
    802.11n: 13 ± 2dBm (@ MCS7)
    Receive sensitivity:
    CCK, 1mbps: -90dBm
    CCK, 11mbps: -85dBm
    6Mbps (1 / 2BPSK): -88dBm
    54Mbps (3/464-QAM): -70dBm
    MCS7 (65Mbps, 72.2 Mbps): -67dBm
    Power consumption:
    Flash off: 180mA @ 5V
    Flash on and brightness set to maximum: 310mA @ 5V.
    Deep sleep: up to 6mA @ 5V minimum.
    Moderm sleep: 20mA @ 5V minimum.
    Light sleep: up to 6.7mA @ 5V minimum.
    Security: VPA/VPA2/VPA2-Enterprise/VPS
    Operating temperature: -20℃～70
    Storage environment: -40℃～125℃, <90% RH
    Applications:
    Smart home device mapping
    Wireless Surveillance
    Intelligent agriculture
    Wireless two-dimensional code recognition
    Wireless positioning system signaling
    and other IoT applications
     
    List
    1 x Development Board
    1 x Camera
    1 x Base (optional)
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques