iCarsoft Professional Multi-system Auto Diagnostic Tool US V2.0

FOR FORD (US FORD, EU FORD AND AU FORD)/ GM / CHRYSLER /

JEEP / HOLDEN +OIL RESET +EPB+BMS+DPF+SAS+ETC+OBDII

iCarsoft US V2.0 is a Professional and powerful vehicle fault diagnosis tool for American vehicles developed by iCarsoft Technology Inc. With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

Notice:

iCarsoft US V2.0 scanners just work on Ford/GM/Chrysler/Jeep/ Holden with OBD II protocol,

if your vehicle were produced before year2005 or after year 2016, please kindly confirm with us about the compatibility before purchasing !

Not all functions are supported on all years/models, because certain functions may be limited from the specific vehicle condition.

If you want to test any certain functions, please kindly confirm with us.

Product Features:

1. iCarsoft US V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2. Applies to the single Brand of most models of Ford/GM/Chrysler/Jeep/ Holdenwhich equipped with OBDII-16 DLC
3. Support OBDII/EOBD Ten Modes of Operation
4. Full System Diagnosis
5. Read &Clear DTC
6. Read Live Data
7. Support special functions: Oil Service Reset, EPB Reset, DPF reset, SAS Reset, ETCs reset, BMS Reset, ABS Bleeding and Injector Coding
8. Support Data Review
9. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
10. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
11. DTC Library to look up when user is operating this tool.
12. Easy To Use With Silicone Keys
13. Full Speed Upgrade Via USB2.0
14. 0″TFT LCD, 480*320 Pixels
15. Multi-language:Multi-language: English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish, Swedish, Finnish, Portuguese, Russian, Danish, Norwegian

Special functions:

*** Varies across year and model ***

Oil Service Reset Function

The US V2.0 allow you to reset Oil Service in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.

 EPB Reset Function:(Not supported on Holden)

This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively.

The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.

DPF Regeneration or Replacement: (Not supported on GM,Ford, Holden)

Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot.

SAS Reset Function:(Not supported on Holden)

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft US V2.0 will allow you to carry out steering angle re-calibration on supported models.

ETCs Reset Function:(Not supported on Holden)

Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.

BMS Reset Function: (Not supported on Chrysler, GM, Holden)

Battery Management System (BMS), registers new battery to the BMS while battery replacement.

ABS Bleeding: (Not supported on Holden)

ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.

Injector Coding: (Not supported on Ford, Holden)

Injector coding, relearn the injector control parameter while the injector renewed or replaced

SPCIFICATIONS:

Display: 4.0″TFT LCD, 480*320 Pixels

Operation Temperature: 0°C ~ 50°C

Storage Temperature: -20°C ~ 70°C

Operating Voltage: 9 ~ 18V

Operating Current: 150mA@12V(Typical)

Power Consumption: 1.8W(Typical)

Dimension: 206*104.1*32.6 mm (L x W x H)

CONTENTS:

US V2.0 Main Unit

Main Cable

Data Cable

TF card (In the main unit)

User Manual

Nylon carry case

PROFESSIONAL MULTI-SYSTEM AUTO DIAGNOSTIC TOOL US V2.0

FOR FORD (US FORD, EU FORD AND AU FORD)/ GM / CHRYSLER /JEEP / HOLDEN
+OIL RESET +EPB+BMS+DPF+SAS+ETC+BLD+INJ+OBDII

① BACK BUTTON--Returns to previous menu.

② UP BUTTON--Moves cursor up for selection.

③ LEFT BUTTON--Moves cursor up for selection.

④ RIGHT BUTTON--Moves cursor down for selection.

⑤ DOWN BUTTON--Moves cursor down for seiection.

⑥ ENTER BUTTON--Confirms a selection(or action)

     from a menu list.

⑦ HELP BUTTON--Shows help information for test

     results or user operation

⑧ F1 FUNCTION BUTTON--In case of special use.

⑨ F2 FUNCTION BUTTON--In case of special use.

⑩ OBDII CONNECTOR--Connects the scan tool to

     the vehicle's Data Link Connector via OBDII Cable.

⑪ STORAGE CARD SLOT--Holds the system of the

     scan tool.

⑫ Data Cable CONNECTOR--Connects the scan tool

     for power supply and update the software if needed.

PRODUCT FEATURES

1.iCarsoft US V2.0 can do it all-reads and clears trouble codes on most of the systems
   such as engine, transmission, ABS and airbag etc.

2.Support OBDII/EOBD Ten Modes of Operation

3.Read Live Data

4.Full ECU Diagnosis

5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC

6.Easy To Use With Silicone Keys

7.Oil Light/Service Reset: Support service lamp reset.

8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the
   EPB system for replacement and initialization.

9.Battery Management System (BMS), registers new battery to the BMS while battery replacement.

10.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration
   process while DPF blockage and turn off the DPF indicator.

11.Electronic Throttle Control system (ETC) relearns the throttle va value while clear or
    replaces the throttle valve.

12.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to
    straight ahead, or recalibrates SAS while steering part replacement.

13.ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.

14.Injector coding, relearn the injector control parameter while the injector renewed or replaced

15.The Print Data function allows you printing out diagnostic data recorded by the scan

16.Battery test allows you getting the voltage of battery with OBD port by the scan tool
      when the engine starts.

17.DTC Library to lookup when user is operating this tool.

18.Upgrade Via PC

19.Multi-language: English, German, Dutch, Spanish, French.

SEVENTEEN
SUPER ADVANTAGES

▪Diagnose Single Brand of most Models (OBDII-16DLC)

▪Full System Diagnosis       ▪Support Oil Service Reset

▪Electronic Parking Brake (EPB) system maintenance

▪Battery Management System (BMS)

▪Diesel Particulate Filter (DPF) Regeneration Control System

▪Electronic Throttle Control System (ETC)

▪Steering Angle Sensor (SAS) Calibration

▪ABS Bleeding(some vehicles do not enjoy this function)

▪Injector Coding(some vehicles do not enjoy this function)

▪Read &Clear DTC                  ▪Read Live Data

▪Support Battery Test              ▪Support Data Review and Print

▪Full Speed Upgrade via PC       ▪4.0″ TFT LCD, 480*320 Pixels

▪Support Multi-Language

OBDII FUNCTION1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.

8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes

11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream 
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search

18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

SPECIFICATIONS

Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)

Contents:
US V2.0 Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual