JILONG 500E FTTx Fiber Fusion Splicer Core Alignment
Splicing Machine Fast-splicing 8s, Fast-heating 18s
500E Specifications:
Splice Method : | Active Clad-Alignment |
Applicable Fibers : | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
Compatible Fiber/Cable : | 0.25~3.0 mm / indoor cable |
Fiber Holder : | Replaceable |
Fiber Diameter : | Cladding: 80-150μm,Coating: 100~1000μm |
Fiber Cleave Length : | 8~16 mm |
Splice mode : | Max 128 modes |
Typical Splice Loss : | SM: 0.03dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.03dB★① |
Return Loss : | >>60dB |
Splicing Time : | SM Quick mode : 8 sec / SM Average: 10 Sec. |
Estimated Splice Loss : | Available |
Heating Time : | Quick mode 18 sec.(SM G652 250μm 40mm Sleeve) adjustable |
Protection Sleeve Length : | 20mm, 30mm, 40mm, 50mm, 60mm |
Heat Programs: | Max 32 modes |
Battery : | 3400mAh Battery Capacity, Typical 120 Cycles (Splice&Heat) per Charge★② |
Electrode Life : | 5000 arcs(replaceable)★③ |
Auto-start : | Splice / Heating |
Automatic Fiber Identification : | / |
Automatic ARC Identification : | Automatic arc calibration by air pressure and temperature |
Results Storage : | The last 10,000 splice records and 2,000 result images |
Tension Test : | 1.96~2.25N |
Operating Condition : | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
Storage Condition : | 0~95% relative humidity, -20~60°C |
Display : | 3.5” color high resolution (800 x 480) display |
Fiber Magnification : | X, Y, XY, X/Y : 320X Magnification |
Power Supply : | AC Input 100-240V, DC Input 9-14V |
Terminal : | USB2.0 |
Weight : | 1.06kg without battery / 1.35kg with battery |
Size : | 130H x 113W x 126D mm |
★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.
★② Splice & Heat cycles based on 40mm shrink tube/0.25mm fiber,may vary depending on the battery status and operating environment. ★③ Electrode life may vary depending on the operating environment.