Features & Specs       

if you think the protector is not in best position you can still adjust the angle of the protective film before you use the lamp 

There is no strict requirement for glue usage. It is recommended that

S7 edge , S8, S9 use more than half of the glue;
S8 Plus, S9 Plus, Note 8 Use all glue.
Light time: 3 minutes （ Divide the screen into three parts: head, middle and bottom. per partial light 1 minute . ）
Adhesive strength: Medium (does not damage the screen and will not easily fall off)
If you have any questions, please contact us in time and we will help you. Don't judge badly. Thank you. We are not easy.
1.Feature (1): Anti-scratch, Privacy, HD, Anti-explosion
2.Feature (2): Anti-fingerprint oil coating,avoid spots and reduce the fingerprints on your screen
3.Surface Hardness: 9H
4.Nanoscale optical adhesives are fully adsorbed
1. Use a foil cleaning kit to wipe the phone to be clean.
2 .Place the sticker over the hole in the handset. Stick the key hole with a label.
3 .Place custom glue drops on flat, clean and dust-free glass screens. Use each glue to use. It is recommended that the glue be poured completely. The excess glue can be wiped clean before turning on the lights. The glue can only be a mass and cannot be separated. Drops on the screen.
4 .The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air.
5 .Remove the release film from the protective film and place the glass on the screen so that the glass contacts the glue and gently translate the glass to a suitable position. Do not lift the glass and allow the glass to separate from the glue (very important).
6 .Wait for about 30 seconds to let the glue slowly spread and level.
7. There is glue overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth three times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
8. Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
9. Irradiate the mobile phone under UV light and need to illuminate twice for about 60 seconds to reach the fully-cured position.

 
Important tips for S10 and S10plus installation (very important):
Glue amount: Pour most of the glue into the amount.
Wipe off the excess glue after sticking to the glass (mainly on the edge of the phone).
Then use the light to take a photo of the top of the phone (1 minute).
Then align the fingerprint to unlock the part and gently press it to squeeze out the excess glue, then light it.
in this way,the glue of the fingerprint unlock part will not be too thick
Then upgrade your system to the latest.
Turn on accidental touch protection and touch sensitivity.
Then re-enter, if you can't record, you can change another finger.
Fingerprint unlocking maybe no very sensitive, if u mind,pls dont purchase.

Regular 1 set include:
glass : 1pcs
UV light :1pcs ( Beautiful and more convenient to use）
Liquid Glue :1pcs

Why Buy From Us?
We offer quality products at a reasonable price.
   
We provide Fast and Free Shipping for the vast majority of our products.
   
Our customer service is available to you before, during and after the sale.

RETURN  POLICY
 
A customer-centered  shopping experience has always been our goal and we want you to  be completely satisfied with every item that you purchase online  from our store.
If you are not  satisfied with an item that you have purchased from us, you may  return the item within 14 days of the order date for a full  refund of the purchase price, minus the shipping & handling  fees. (Any "Free Shipping" item returned will have the outbound  freight charge deducted from the total return.)
CONTACT  US
Our goal is to answer  all customer emails within the same business day. Responsible  and Accessible.
Our Customer Service  Department will answer your emails within 48 hours (Excluding Weekends and Public  Holidays)!.If you have  questions, please feel free to email us or by clicking on the  contact seller link.
Customer Service Hours  are Monday - Saturday from 9am - 6pm Beijing Standard Time.We apologize for the late reply during the holidays.

PAYMENT
We accept payment by paypal only

SHIPPING    
We will be dispatched to you within 1 working days  of your payment  being received and verified. (Excluding Weekends and Public  Holidays)!
Our order will be  shipped from our warehouse where the items has been accurately  picked, securely packed and shipped in a professional manner.