FiiO BTA30PRO Bluetooth Receiver Portable Transmitter Stereo Wireless High Resolution aptX/LDAC DSD256 Optical/Coaxial/Line-Out for PC/TV/Speaker/Home Audio

Open Box Never Used

[Transmit and receive SBC/aptX/aptX HD/LDAC]: LDAC codec that supports 96kHz/24bit is the highest standard for Bluetooth devices. The upgraded BTA30Pro amplifier is basically one of the rare Bluetooth devices with support for both LDAC transmission and reception. When under USB/SPDIF input, it also supports LDAC transmission, allowing for Hi-Res lossless transmission anywhere and anyhow.
[Supports up to 384k/DSD256]:The XMOS receiver chip easily handles a wide variety of audio formats up to 384kHz/32bit PCM and native DSD256, allowing you to enjoy it worry-free.
[High-performance ES9038Q2M DAC]: Responsible for digital-to-analog conversion is the excellent ES9038Q2M, letting you easily hear every small detail in your music and providing a wider dynamic range than with portable audio products. Film capacitors work with the ES9038Q2M for clearer and more transparent treble.
[3 operating modes for you]: (1)Bluetooth receiving mode can free your old setup; (2)Bluetooth transmitting mode can create your own private theater; (3)Digital decoding mode for a serious upgrade to the sound.
[Qualcomm CSR8675 Bluetooth chip]: The BTA30Pro portable headphone amps utilizes the efficient Qualcomm CSR8675 Bluetooth chip for enhanced audio applications – supporting 32bit audio processing and equipped with a 120MHz DSP, it effectively integrates various Bluetooth decoding functions into one package.

New released bluetooth amplifier receiver ----- FiiO BTA30PRO is coming

Not only does the BTA30Pro bluetooth transceiver have Dual Hi-Res Certifications, but it also can come true input and output at the same time through a new Bypass mode.

The BTA30Pro transceiver is even more versatile with the new Bypass mode, allowing you to connect to several different devices at the same time!

When in Bluetooth Transmitting Mode, Bypass mode allows for optical input to optical/Bluetooth output at the same time.

In DAC mode, Bypass mode makes possible optical input to optical output.

ES9038Q2M DAC

Responsible for digital-to-analog conversion is the excellent ES9038Q2M, letting you easily hear every small detail in your music and providing a wider dynamic range than with portable audio products. Film capacitors work with the ES9038Q2M for clearer and more transparent treble.

ES9038Q2M DAC chip

CSR8675 Bluetooth chip

XMOS decoding chip

Upsampling audio DSP chip

Three modes enough for lots of playings what your need

Turn on Bluetooth Receiving Mode (RX)

1. In Bluetooth Receiving Mode, connect your phone/music player to the BTA30Pro receiver via Bluetooth function, and the BTA30Pro connect to your non-Bluetooth music system with cable (like Optical/ Coaxial/Line-out) – giving your old setup a new life by being able to play wireless music.

PS: Supports LDAC/aptX/aptX HD/AAC high-definition Bluetooth formats.

Turn on Bluetooth Transmitting Mode (TX)

Connect the digital output of the TV/CD player/computer to the BTA30Pro bluetooth amplifier with cable (like USB/Optical/Coaxial), and use your device via bluetooth function (like your speaker/headphone) to connect with BTA30Pro receiver, which can transmit to your Bluetooth headphones (including the LDAC format with any input) for a truly cinematic listening experience.

PS: LDAC/aptX HD/aptX LL/SBC formats are supported; LDAC is supported through optical/coaxial/USB inputs.

Turn on Digital Decoding Mode

1. When connected to a computer or other devices with the appropriate cable, the BTA30 Pro amplifier can be used as a DAC to convert digital audio to high-quality analog signal for a serious upgrade to your sound.

PS:

(1)Coaxial input supports up to 384kHz/24bit and native DoP128; optical input supports up to 96kHz/24 bit; USB input supports up to 384kHz/32bit and DoP256.

(2)Supports UAC2.0 and driverless UAC1.0 (set on the app); RCA line output is possible from any DAC mode input.

(3)Coaxial input is not supported when using coaxial output.

(4)Bypass mode can only be used for optical input in transmitting and DAC modes.

2. Want to directly connect your DAC/audio decoders to any smartphone?

connect the optical out of the BTA30 Pro amplifier to the digital input of your external DAC to allow it to decode directly from your phone.

3. All connections in one:

RCA analog output, Optical/Coaxial output, Optical/Coaxial input, USB Type-C

Connect to 2 devices at the same time

Under Bluetooth Receiving Mode, the BTA30Pro bluetooth receiver can connect to and remember two devices at the same time. Two new buttons allow you to manually choose which of the two Bluetooth devices you want to connect to.

PS: When using LDAC and aptX LL in Bluetooth Transmitting Mode, the BTA30Pro receiver cannot be connected to two Bluetooth devices at the same time.

Dual connections

RGB light indicator

Convenient intelligent interaction

Accessories included