Modern presentation
In the 1980s and 1990s, cassette tapes were extremely popular, and thus cassette players remained popular for many generations. However, nowadays the availability of new cassette players is almost non-existent, making the initial stages of the CP13 project extremely difficult, almost leading to its cancellation.
However, after investing a lot of time and effort, we were able to slowly continue working on CP13, leading to its current version. We may miss the classics, but we are always looking for new ways to present music. We want to be able to relive the days when pure analog sound was known and common.
Custom components
After much trial and error, we carefully selected rare materials to ultimately obtain a mechanism design that is more stable than many other mass-produced designs. We also decided to simplify motion as much as possible by removing the recording and auto-rewind functions to focus on ensuring maximum audio quality.
Large pure copper flywheel
The CP13 uses a custom, oversized pure copper flywheel with a diameter of 30.4 mm and a thickness of 4 mm. It is made of higher quality materials and is larger than those typically used in cassette players. This allows the tape spool to move as smoothly as possible during playback and therefore keeps vibrations very low, ultimately resulting in a more stable, better quality sound.
Power supply to the motor with high voltage
The CP13 motor is powered by a high voltage 4.2V power supply, which is quite a bit higher than the 1.8V or 3V typically found in today's cassette players. This power supply works with the motor's speed stabilization circuit, which increases motor resistance when needed to ensure a stable speed of movement - which limits unwanted pitch changes and also allows the CP13 to support a wider range of cassette types.
Custom head with balanced amplification
The head is one of the key components of every tape recorder, which is why we use high-quality ones for the CP13, even if they are expensive. Moreover, we tightly control the way the CP13 is made to ensure minimal differences in output between the left and right channels, much smaller than typical cassette players today. The magnetic head also uses a thickened cover, which better protects the head against external interference. This also significantly reduces wear on the head during playback, allowing it to last longer.
Unlike the single-ended signal acquisition typically found in current cassette players, the CP13 uses a differential circuit to balanced signal acquisition from the head, ensuring more stable signal transmission, higher signal-to-noise ratio and lower distortion.
Fully analog circuit
100% pure analog sound
To ensure true analog playback, the entire CP13 audio circuit uses analog devices - from the magnetic tape head through to signal amplification. The result is a classic, completely analog sound.
Audiophile JRC5532 operational amplifier
The CP13 uses the famous JRC5532, known to some as the classic "king of operational amplifiers". This amplifier features a fully analog audio circuit, providing a familiar, pleasant sound that is sure to impress fans of analog sound.
A fusion of squares and roundings
Two-color aluminum alloy housing
CP13 has a carefully crafted two-color, all-aluminum housing. The clearly visible '0' screws, which perfectly complement the square yet rounded design, mean that the CP13 is an example of beauty coexisting in harmony with ergonomics. CP13 buttons undergo a hard oxidation process, making them more resistant to wear and corrosion. Behind the aluminum alloy volume control knob there is a large, analog potentiometer, which, compared to flat potentiometers used in cassette players, is not only more reliable and provides a more stable sound, but also simply gives a better impression during use.
Long battery life
13 hours of operation
The CP13 uses an 1800 mAh lithium battery, selected for its ability to provide solid power for longer periods of time than regular batteries. In fact, the CP13 battery allows you to achieve 13 hours of operation and 268 days in standby mode.
Dual-mode power supply
Consistently great sound
The CP13 is powered by a lithium battery that can be charged via the USB Type-C port when connected to a 5V power supply.
FIIO's extensive experience in designing safe charging circuits with safety mechanisms ensures that you can use the CP13 while charging without any problems.
Compact design
FIIO engineers paid great attention to making the CP13 as compact as possible. By integrating ingenuity in manufacturing and structural design, the CP13 is only 31.8mm thick, making it thinner and more compact than most cassette players currently in production.
Box Contains
-
FiiO CP13 Portable Stereo Cassette Player (Blue/Silver)
- 1 x Cable
-
FiiO CP13 Portable Stereo Cassette Player (Blue/Silver)
- 1 x Cable
Brand | FiiO |
Model | FiiO CP13B |
MPN | FICP13B |
Type | Stereo Cassette Player |
Supported cartridge types | All types I to IV |
Output | 2-track stereo playback |
Output level | greater than 250 mV |
SNR | >55dB |
Battery | 1800mAh lithium |
Battery life | > 13 hours at 40 mV |
PayPal is our only method of payment. Your PayPal account must be a Verified PayPal account.
Selecting "Immediate Pay" is the way to go. If you select eCheck, it may take 2-8 days to clear PayPal.
Please include a phone number as UPS and our Trucking Companies require it.
We prefer to ship to a confirmed PayPal address and whether yes or no we may still contact you for additional verification.
For shipments in NY&CA, we are required to collect the appropriate sales tax.
Most purchases are shipped within 24-48 Business Hours
Items with "free shipping" are only shipped free to the 48 contiguous United States.
We supply tracking information directly to your eBay account as well as via email within 24 hours after the shipment leaves our warehouse.
Downtown Photo is proud to offer a 30 day return or exchange policy on most items for a full money back refund, excluding any shipping charges (for items which we offer free shipping, our standard shipping charges will be deducted from any refund or credit)
Returned or exchanged products must be in brand-new, mint condition. Items must be in the original, undamaged manufacturer's packaging with all packaging materials, including instruction booklets, packing inserts, and the blank warranty cards. Memory cards and any other Blister Pack items are not returnable once opened. Any merchandise missing the original Universal Product Code (UPC) cannot be returned. The manufacturer's labeled packaging must be enclosed within an additional shipping carton. Please do not place stickers or shipping labels on the original manufacturer's package.
Please be aware that we cannot accept returns on the following items unless they are shown to be defective in manufacture (as decided by the manufacturer):
- Underwater equipment (once taken underwater
- Inkjet printers (once ink cartridge/ribbon has been installed)
- Processing equipment (once used with chemicals)
- Educational DVDs, Tapes and Books once opened
- Blister-packed items once opened
- Original manufacturer software once opened
Please enclose a copy of your invoice with your return and tell us whether you would like the item to be replaced, exchanged, or refunded.
Returns can take up to 5 days in-house from the date we receive it to process. When returning an item, please make sure you use a shipper which provides you with Insurance and a tracking number. Items returned without a tracking number might take much longer to be processed.
![left_banner](https://www.sunandfuninoc.com/sites/jx/DZ/29.DowntownPhoto/listing/images/left_banner.jpg)