Kit of REFLECTIVE adhesive strips for car rims!

PROFESSIONAL LINE

Kit of pre-curved reflective stickers for rims, with these stickers your car will be even more beautiful and aggressive and especially at night you will be more visible to other vehicles in dark areas and therefore safer! (all reflective stickers in general, to be visible at night, must be illuminated by an external light beam projected at a certain angle, as for example happens at night with road signs illuminated by car headlights, in the absence of light the effect reflector does not activate). The kit you will receive consists of 12 strips, everything needed for the complete decoration of the 4 sides of the circles, plus 2 FREE pieces to be used as a spare in case of an error during application, these stickers are not like the classic rolls with very common straight adhesive strips on the market, difficult to apply! but they are already curved, easy to apply and quick to fit without necessarily having to remove the wheels, for a guaranteed result, significantly improving the aesthetics of your car.

Characteristics:

These adhesive strips are cut with high quality reflective films among the best on the market, very resistant, with only 60 - 70 microns of thickness, they ensure perfect adhesion and exceptional durability even in hostile conditions, such as frost, high temperatures, dirt, chemicals and other harmful agents. If you want to remove these stickers, simply heat them with a bodywork heat gun without damaging the enamel of the rims.

Before purchasing this kit:

1) Check how many inches the rims of your car are, usually the inches are written on the tyres, then select the desired size in this advert!

2) Check if your rims have a regular edge where a strip can be applied, some types of rims have spokes that reach all the way to the outer perimeter of the rim and do not have enough flat space to accommodate an adhesive strip.

3) Check what thickness of the edge you can fit on your rims, a thickness that is too high could also overlap over the rim spokes, creating an uneven outer edge of the adhesive, which is why in this advert you can also select the thickness of the adhesive strips.

Tips on how to apply this kit to your car rims:

1) Wash the rims carefully with common car shampoo, do not use chemical additives or polishing, oily, silicone substances and other chemical agents that could weaken the adhesive of the stickers, but only neutral shampoo!

2) Dry the circles perfectly, there should be no trace of water left on the edge.

3) Avoid applying the stickers in a cold environment, but if the work will be done in a cold environment anyway, before applying the stickers, heat the surface of the rim with a heat gun! Hot-applied stickers stick better!

4) Apply the first strip at any point of the circle, accompanying it along the edge with the thumb of your hand (for each circle, 3 semi-moon strips must be applied which when joined together will form the complete circle) overlap the strip still to be applied over the other already applied at least 2 mm then finally cut off the excess of the third strip that completes the circle.

5) Use the heat gun again to thoroughly heat the stickers already applied by rubbing them with your fingers.

6) Repeat the same operation for the other 3 remaining circles.

7) If there is a problem with the kit we sent you, please do not rush to hasty solutions by leaving a negative comment, but contact us immediately and we will find a solution together. Thank you.

Some examples:

BUY IN TOTAL SAFETY!!!

we are professional sellers

Express courier