The development of the DC (direct-coupled) power amplifier can be
counted as one of Kenwood's most significant engineering successes,
because it provides an almost perfect linear frequency response that
starts virtually from 0Hz.
The direct-coupled amplifier consists
of a three-stage differential circuit (with a dual-gate FET in the first
stage) and Kenwood's power amplifier circuitry, assuring ample, highly
stable, effective power output.
To safeguard all circuits, and your precious speakers, there's a built-in limiter protection circuit and protection relays.
With
phase and transient distortion both at negligible levels, the Kenwood
KA-7100 provides a refreshing clarity and roundness of sound even at
high volume levels.
This unit was fully internal checked up. No sign internal corrosion, No sign of
capacitors leaks, No sign of circuit board degrade. No sign of previous repair or modification. Internal circuit is in original condition. Check internal
photos for details.
All dials, all inputs, buttons and speaker outputs are cleaned, de-oxidized and tested.
Sound output is crisp and strong on all speakers output terminals.
Uses U.S. AC Power 120V / 60 Hz Only
No return if due to buyer mishandling or damage because of lack of proper operational knowledge - and above all we are watching out for the part swappers if anti-tamper stickers on the unit removed or broke off. Serial number also
has been recorded.
If you happen to be a local buyer, you are more than welcome to contact
us by eBay message to stop by and audition the item prior to buying. 10%
discount will be applied toward the purchase price to local buyer.
Will ship the 26 lbs unit in
fully insured carrier, double boxed (up to 40lbs totally) with foam
insulation and all corner reinforced.
Buyer with no feed back please contact before buy. I reserve the right to cancel the sale to anyone.
Buyer direct signature is required by both eBay and Carriers due to Buyer protection policy. No meet in person - No delivery.
Flat rate $40 expedite shipping to anywhere in the U.S to residential address only. No P.O Box.
_______________
Specifications
Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 0Hz to 100kHz
Total harmonic distortion: 0.02%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 80dB (MM), 110dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 430mm (17") x 149mm (6") x 379mm (15")
Weight: 11.5kg (26lbs)