If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Features:
Kit includes all components and circuit boards but does not include power supply,antenna,cables,audio cables and coaxial cables
7W FM without any debugging
No matter you are a novice or veteran,as long as you are willing to solder
You can successfully DIY
Control panel components:mainly consists of 51 series microcontroller,dot matrix LCD display and keypad
Components:digital FM radio chip sc3355+9018+2+2+RD15HV sc2053 four-stage high-frequency power amplifier
and power regulation components
Transmitter kit main function
1.DSP+PLL technology,so that the frequency is more stable,the frequency does not change with the environment and frequency drift
2.No need any adjustment,bring DIY fun to beginners
3.Frequency can be adjusted continuously within the specified range
4.With microphone input interface,and can control the microphone volume by digital potentiometer
5.Digital potentiometer audio input to adjust the volume
7.Output power grid is very good at suppressing harmonics,making the output spectrum cleaner
8.Set the frequency and volume of power-down protection,no need to set it again next time you turn on the power
Specification:
1.Input voltage:DC12V
2.Input current:3.0 A
3.Audio signal:Maximum input Vpp less than 1V
4.Microphone type:round microphone or microphone
5.Output power:15W
6.Output impedance:50Ω
7.Operating frequency:76m -108 MHz
8.Frequency of 0.1MHz
9.Deformation degree:0.03%~0.1%
A.Board size: Fireproof board:150*60mm(excluding fins)
Control panel:58*36 mm
B.Transmitting distance:more than 8 kilometers(provided that it is an open field to transmit)
C.Stereo separation:63dB or more
This kit is specially designed for the requirements of beginners
Basically no need to debug,debugging difficulty is basically 0
As long as you follow the correct welding operation
Whether you are a veteran or a novice,you can spend the least money to enjoy the DIY fun of FM amplifier
As for soldering, you do not have to worry too much
This set of capacitors used in the resistor strip are 0805 package
Soldering board and plug-in is the same
This transmitter must use a 50 ohm antenna,frequency of about 100 meters antenna
Do not use a conductor,rod antenna,2.4 G antenna,radio antenna
Package Includes:
1*Host
1*LCD screen
Note:
Only include the above package products
Specifications are manually tested and are for reference only
Please allow 0-1cm error due to manual measurement
Please make sure you don't mind before bidding
Due to the difference between different monitors
Pictures may not reflect the actual color of the item.Thank