Detroit Diesel DD15 Camshaft Timing Tool TDC Locating Pin Engine Barring Tools

Item Description

组合-1
 
 
APPLICATION：
Fits all years of Detroit Diesel DD15 DD16 EPA07 EPA10.
 
①Engine Brake Adjustment Tools (4.6MM & 4.1MM)
Works on Detroit Diesel DD15 & DD16 engines built before HDE0077481 & DD13 engines built before HDE0079072.

②19MM High Pressure Fuel Line Socket
Alternative to W470589090900, supersedes J-48770, works on all Detroit Diesel DD13, DD15, and DD16, Supersedes J-48770.

③Engine Barring Tool
Fit for Detroit Diesel DD13 DD15 DD16 MBE 4000 MBE 900 Detroit Diesel, Mercedes Benz Actros, Atego, Man 5, 6, 8-cylinder engines - D25/28.Alternative to W470589046300 or J-46392

④Camshaft Timing Tool Kit
Works on all years of Detroit Diesel DD15 & DD16, EPA07 and EPA10. Alternative to W470589104000 
TDC Locating Pin
For Detroit Diesel / Mercedes Benz, Works on DD13, DD15, DD16 Engines. Alternative to W470589001500 
 
⑤Idler 3 Cantilever Tool and Crankshaft TDC Locating Tool
Fit for Detroit Diesel DD13 DD15. Directly replaces OEM Part J-47487 & J-48630
组合-22
 
Using TDC Locating Pin
A must tool for Camshaft Timing Verification,.
When the clutch is removed, the timing pin is get inserted into the Crankshaft Position Sensor hole in the flywheel housing and engage into the flywheel notch.

Using Enging Barring Tool
Designed to adjust the engine for correct position.
Used with 1/2" drive wrench. This tool is used to bar the engine over for service procedures, installs to engage the flywheel teeth and rotate the engine using standard square drive hand tools.

Using Fuel Line Socket
Required a 3/8 Inch Drive Wobble Extension tool.
Specially design for quick and easy loosening and tightening the union nut at high pressure lines of diesel engines
 
 
 
DD13, DD15 & DD16 ENGINE BRAKE/ JAKE BRAKE LASH ADJUSTMENT STEPS
1. Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves).
2. Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder.
3. When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem.
a. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm (0.1614 in.).
b. DD 15 & DD16 engines built starting with HDE0077481 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm (0.1811 in.).
c. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm (0.1614 in.).
d. DD13 engines built starting with HDE0079072 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm (0.1811 in.).
4. Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4.
5. Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft).
6. Install the rocker cover.
 
 
Includes 8 Tools(Set of 9)
1x Engine Brake Adjustment Tool 4.6MM
1x Engine Brake Adjustment Tool 4.1MM
1 set of Camshaft Timing Tools(2PCS)
1x High Pressure Fuel Line Socket
1x Engine Barring Tool
1x TDC Locating Pin
1x Idler 3 Cantilever Tool
1x Crankshaft TDC Locating Tool
We accept PayPal or another payment method .
All major credit cards are accepted through secure payment processor PayPal.
We are US seller, all Items will be shipped out within 2 working days from our West or East warehouses upon receipt of your cleared payment. We are duty off on weekends and other public holidays.
International Buyers Please Note:
  1. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
  2. Please check with your countries customs office to determine what these additional costs will be prior to bidding/buying.
All of our items come with a 60-day return policy. We insure all our items are new and in excellent condition prior to shipping. In the event that you receive the item is not in the standards above, please contact us via eBay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation.
  1. If you need to return, please double check to make sure the item does not work and contact our customer service representative, let us know the detailed problem and send us some photos for confirmation. Then get a unique address to return.
  2. Buyer is responsible for return shipping fee, including original freight, handling charges and the return freight when the returns is non-seller mistake (e.g. you purchased wrong model, wrong color or wrong size)
  3. We only accept return for original package, please make sure the item has not been used or installed.
  4. We reserve the right to refuse any return for any request that does not meet these requirements.
We are selling Led lights, auto and motorcycle accessories, home garden and sports equipment. Best price, quality and service. Follow us and get more promotional news.
Providing good customer service is our first priority. You are welcome to contact us through eBay message if you have any questions. We normally get back to you within 12-24 business hours.
PushAuction