Film slitter to cut any roll film (current or vintage size) to any smaller size


Here is an easy way to get new film into your old camera that uses film that is no longer available -- or that is not available in the size that you need.  It is called a film slitter -- some people call it a film cutter, some call it a film slicer, and others refer to it as a film splicer.  Whatever you call it, it cuts a roll of film down to a thinner roll of film.  It is available in whatever size you can image -- just about. What makes it so great is that it is custom-made for your needs! If you need a 35mm to 16mm slitter, that's exactly what you get. BUT, these slitters come in many other sizes (see below). Let's say you want a 120 to 16mm slitter. That's what you will get.  But let's say you want a 120 slitter that cuts a 127 roll, and a MINOX roll -- ALL AT THE SAME TIME. We got them!  Amazing -- and convenient.
 
Each slitter can only cut ONE size of film (just about any size from 70mm and smaller), and we set it up to cut whatever smaller size or sizes that you need.  

These slitters are shipped directly to your door -- for free!  ($20 outside of the US)  The slitters use common double-edged razor blades that are interchangeable -- but seem to never wear out!  I've sold HUNDREDS of these over the last TWENTY YEARS -- and had no returns, breakdowns, or complaints. 

And the slitters come in a wide variety of sizes, as follows:

Slit 120 or 220 film:

To make SIX rolls of 9.25mm film for your MINOX, Atoron, Chadt, P3, and Acmel cameras

OR to make ONE 16mm roll AND ONE 127 roll for your classic cameras -- AT THE SAME TIME!

OR to make THREE rolls of 16mm film for your MINOLTA-16, Mamiya-16, CamBinox, Edixa, GaMi-16, Kiev, Yashica-Y16, Yashica-16EE, or any other 16mm camera

OR to make FOUR rolls of 15.25mm film for your Minolta-16, Mamiya-16, CamBinox, Edixa, GaMi-16, Kiev, Yashica-Y16, Yashica-16EE, or any other 16mm camera

OR to make THREE rolls of 16mm film for your MINOLTA-16, Mamiya-16, CamBinox, Edixa, GaMi-16, Kiev, Yashica-Y16, Yashica-16EE, or any other 16mm camera PLUS a roll of Minox film -- AT THE SAME TIME!

OR to make FOUR rolls of Minox film plus a roll of 16mm film for your MINOLTA-16, Mamiya-16, CamBinox, Edixa, GaMi-16, Kiev, Yashica-Y16, Yashica-16EE, or any other 16mm camera

OR to make THREE rolls of 110 film for your Pentax-110, Minolta 110, Yashica 110, Fujica 110, Kodak 110 or any other 110 camera -- this does NOT create 110 perforations

OR to make THREE rolls of 17.5mm film for all of your HIT camera collectibles, such as Hit, Tone, Mycro, Vesta, Bell, and all others

OR to make ONE roll of 127 film for all of your older 127-sized cameras. The FILMSLITTER cuts the paper backing as well -- at the same time!

OR to make TWO rolls of #00 (30.5mm) film for your older Univex, Iris, Sida or other cameras that use unperforated 31/32mm film. The FILMSLITTER cuts the paper backing as well -- at the same time!

OR to make one roll of 828 film for all of your older 828-sized cameras. The FILMSLITTER cuts the paper backing as well -- at the same time!

OR to make one roll of unperforated 35mm film!

OR to make one roll of unperforated 35mm film and one roll of 16mm film -- at the same time!

OR to make one roll of unperforated 35mm film and TWO rolls of Minox -- at the same time!

OR to make ONE roll of 126 film for all of your older 126-sized (Instamatic) cameras. The FILMSLITTER cuts the paper backing as well -- at the same time!


Slit 35mm PERFORATED film:

To make TWO rolls of 9.25mm film for your MINOX, Atoron, Chadt, P3, and Acmel.

OR to make ONE roll of 16mm film for your MINOLTA-16, Mamiya-16, CamBinox, Edixa, GaMi-16, Kiev, Yashica-Y16, Yashica-16EE, or any other 16mm camera.

OR to make ONE roll of 110 film for your Pentax-110, Minolta 110, Yashica 110, Fujica 110, Kodak 110 or any other 110 -- this does NOT create 110 perforations.

OR to make ONE roll of 17.5mm film for all of your HIT camera collectibles, such as Hit, Tone, Mycro, Vesta, Bell, and all others.

OR to make THREE rolls of 8mm film for all of your 8mm cameras, such as Camera Lite and Seastar.

OR to make ONE roll of 21mm film for your F21 camera.

OR to make ONE roll of 16mm film AND one roll of Minox AT THE SAME TIME.


Slit 35mm UN-PERFORATED film:

To make TWO rolls of 16mm film for your 16mm cameras.

OR to make TWO rolls of 17.5mm film for all of your HIT camera collectibles, such as Hit, Tone, Mycro, Vesta, Bell, and all others.


Slit 16mm film:

To make ONE roll of 8mm film (from perforated 16mm film) for all of your 8mm cameras, such as Camera Lite and Seastar.

OR to make TWO rolls of unperforated 8mm film (from unperforated 16mm film) for your 8mm cameras, such as Camera Lite and Seastar.

OR to make TWO rolls of perforated 8mm film (from perforated 16mm film).

OR to make ONE roll of 9.25mm film for your MINOX, Atoron, Chadt, P3, and Acmel.

 
Slit 70mm film:

To make ONE roll of 46mm film for your older cameras that use unperforated 46mm film.

OR to make TWO rolls of 35mm film (from perforated 70mm film) for all of your 35mm cameras that use unperforated 35mm film.  The perforations will still be there but they are different from 35mm perforations.

OR to make TWO rolls of 35mm film (from unperforated 70mm film) for all of your 35mm cameras that use unperforated 35mm film.

OR to make ONE roll of 35mm film (from perforated or unperforated 70mm film) for all of your 35mm cameras that use unperforated 35mm film.

OR to make ONE roll of 120 film for all of your 120 cameras.

OR to make ONE roll of 127 film (46mm) AND one roll of 16mm film -- at the same time!

OR to make ONE roll of 127 film (46mm) AND one roll of MINOX film -- at the same time!

OR to make ONE roll of 40mm film for all of your 40mm cameras.


Slit 65mm film:

To make ONE roll of 120 film for all of your 120 cameras -- cutting off just one side of the film and leaving the perforations on the other side

OR to make ONE roll of 120 film for all of your 120 cameras -- cutting off BOTH sides of the film and most of the perforations.

OR to make ONE roll of 127 film (46mm) AND one roll of 16mm film -- at the same time!

OR to make ONE roll of 127 film (46mm) AND one roll of MINOX film -- at the same time!

As you can see, the possibilities are endless.  CUSTOM SIZES ARE AVAILABLE.  Just contact us for details. There are USUALLY no extra costs for special slitters, but it will take several days to manufacture and to finally arrive.



BEFORE YOU BID, it is a good idea to ask me what size film you want to cut and what size film(s) you want to create!  That way I can check to see if I have it in stock. 

If you want more than one slitter, you get a 10% cumulative discount on each one! BUT let me know BEFORE YOU PAY -- so I can send you a revised invoice!!!!!

NO RESERVE PRICE!  FREE SHIPPING -- in the US

Returns HAPPILY accepted for ANY reason.

CHECK MY GREAT EBAY SELLER FEEDBACK.  I've been selling these slitters for over 25 YEARS!!!!  If you have a problem or question, please contact me directly FIRST -- BEFORE CONTACTING EBAY.