10000W 48V Solar Hybrid Inverter 120V/240V Split Phase MPPT Controller PV 500VDC
 
 
 
 
Features
⚫ Anti-backflow grid connection function, support for inverter and mains power hybrid output, support for use without battery, can be set up for on-grid power generation.
⚫ Two output modes: mains bypass and inverter output; uninterrupted power supply.
⚫ Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
⚫ Advanced MPPT technology with an efficiency of 99.9%.
⚫ Designed with an LCD screen and 3 LED indicators for a dynamic display of system data and operating status.
⚫ With time slot control, you can set the priority of using the mains and battery according to the time slot in conjunction with the local peak and valley tariffs.
⚫ Power saving mode available to reduce no-load loss.
⚫ Intelligent variable speed fan efficiently dissipates heat and extends system life.
⚫ Lithium battery activation by PV solar or mains, allowing access to lead-acid batteries and lithium batteries.
⚫ 360 ° all-around protection with a number of protection functions.
⚫ Complete protections, including short circuit protection, over-voltage, and under-voltage protection, overload protection, reverse protection, etc.
Using peak cutting and valley filling to save money.
 
Specification:
Models POW-SunSmart SP5K
Parallel Mode
Permitted parallel number 1~6
AC Mode
Rated input voltage 110/120Vac
Input voltage range (90Vac~140Vac) ±2%
Frequency 50Hz/ 60Hz (Auto detection)
Frequency Range 47 ±0.3Hz ~ 55 ±0.3Hz (50Hz);
57 ±0.3Hz ~ 65 ±0.3Hz (60Hz)
Overload/short circuit protection Circuit breaker
Efficiency >95%
Conversion time (bypass and inverter) 10ms (typical)
AC reverse protection Available
Maximum bypass overload current 63A
Inverter Mode  
Output voltage waveform Pure sine wave
Rated output power 5000VA
Rated output power 5000W
Power factor 1
Rated output voltage 120Vac Rated output voltage
(100/105/110Vac Settable)
Output voltage error ±5%
Output frequency range 50Hz ± 0.3Hz;
60Hz ± 0.3Hz
Maximum Efficiency >92%
Overload protection (102% < load <110%) ±10%: report error and turn off the output after 5 minutes;
(110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds;
(Load >125% ±10%): report error and turn off the output after 5 seconds;
Peak power 10000VA
Loaded motor capability 4HP
Rated battery input voltage 48V (Minimum starting voltage 44V)
Battery voltage range Undervoltage alarm/ shutdown voltage/ overvoltage alarm/overvoltage recovery... settable on LCD screen
Power saving mode self-consumption Load ≤ 50W
AC Output (Grid)
Rated Output Power 5000W
Max. apparent power 5000VA
Max. output current 41.7A
THDI <3%
Rated voltage 120Vac
Frequency 50Hz/60Hz
AC Charging
Battery type Lead acid or lithium battery
Maximum charge current(can be set) 0-40A
Charge current error ± 3Adc
Charge voltage range 40–58Vdc
Short circuit protection Circuit breaker and blown fuse
Circuit breaker specifications 63A
Overcharge protection Alarm and turn off charging after 1 minute
PV Charging
Maximum PV open circuit voltage 500Vdc
PV operating voltage range 120-500Vdc
MPPT voltage range 120-450Vdc
Battery voltage range 40-60Vdc
Maximum PV input power 5500W
Maximum PV input current 22A
PV charging current range (can be set) 100A
Charging short circuit protection Blown fuse
Wiring protection Reverse polarity protection
Hybrid charging Max charger current specifications (AC charger + PV charger)
Max charger current(can be set) 100A
Certified specifications
Certification CE(IEC62109-1)
EMC certification level EN61000
Operating temperature range -10°C ~ 55°C
Storage temperature range -25°C ~ 60°C
Humidity range 5% to 95% (Conformal coating protection)
Noise ≤60dB
Heat dissipation Forced air cooling, variable speed of fan
Communication interface USB/RS485(WiFi/GPRS)/Dry contact control
Dimension (L*W*D) 446.9mm*350mm*133mm
Weight 14kg
 
 
Keywords:
⚫ Single phase/split phase/three phase
⚫ 120/208/240V AC output
⚫ Off-grid & on-grid
⚫ 1 MPP Tracker
⚫ Parallel operation
 
 
Characteristic:
⚫ Off-grid & on-grid pure sine wave inverter.
⚫ The Maximum number of parallel connections is 6.
⚫ Higher output power up to 5000W.
⚫ 120/208/240Vac AC output.
⚫ Supports single-phase/split-phase/three-phase devices.
⚫ Fast switching time of 10ms.
⚫ Compatible with 48V lithium-ion and lead-acid batteries, support user-define.
⚫ Max. PV charging current up to 100A.
⚫ Max. AC is charging current up to 40A.
⚫ Max. hybrid charging current up to 100A.
⚫ 90~140Vac AC input voltage range.
⚫ 120~500Vdc wide voltage range for PV access.
⚫ Higher input DC current up to 22A in a single circuit.
⚫ Energy saving mode function to reduce no-load energy losses.
⚫ Configure multiple communication interfaces (RS485/USB/Dry contact).
⚫ Durable finish with high anti-corrosion.
⚫ Effective forced air cooling to ensure that the equipment runs stably.
 
 
5.5KW Solar Input Power
- 1 built-in MPP Tracker for Max. DC coupled power of 5.5KW
- MPPT with 99.9% efficiency
- 125~500Vdc wide voltage range for PV access
- 22A Max. MPPT current
 
5KW Output Power Off-grid
- Continuous AC power of 5KW
- 120/208/240Vac pure sine wave AC output
- Supports single-phase/split-phase/three-phase equipment
- Energy saving mode function to reduce no-load energy losses
 
48V Battery
- Compatible with 48V lithium-ion and lead-acid battery
- Support user-define
- Maximum 100A charging current continuous charging
 
Multiple communication interfaces
- RS485/CAN/USB/Dry contact
- Support for WIFI or GPRS peripheral communication components
 
Excellent fuselage design
- Durable finish with high anti-corrosion
- Effective forced air cooling to ensure that the equipment runs stably
 
5KW Output Power On-grid
- 41.7A Max. output current
- High output power up to 5000VA/5000W
- Output power factor of 1.0
  
 
 
 
 
 
 
 
 
PushAuction