Reliable Water Flow: Our 110V RV Water Pump is designed to provide a consistent water flow for your RV, boat, or marine applications. With a pressure setting of 50PSI/3.5BAR and an open flow rate of 15.0LPM/4.0GPM, you can enjoy a steady and reliable water supply wherever you go.

High-Quality Performance: With a voltage of 110V and a maximum amperage of 1.2A, our water pressure pump delivers efficient performance while consuming minimal power. Its 50PSI/4.0GPM design ensures optimal water pressure for your water-related activities.

Intelligent Pressure Switch: Our 110V RV Water Pump features an intelligent pressure switch that allows for on-demand opening and closing, ensuring a low-noise operation. It automatically shuts off when not in use and starts up when needed, providing a convenient and efficient water supply.

Durable and Safe: This water pressure pump is built to meet ISO 8846 standards, ensuring marine-grade ignition protection. It features self-priming capability and thermal overload protection with automatic restart, providing peace of mind and preventing damage to the pump. Please note that running the pump dry or pumping flammable liquids is not recommended for safety reasons.

Easy Installation: This 110V Water Pump is self-priming and features thermal overload protection with automatic restart. The horizontal inlet tubing allows priming up to 30 FT (9m), while the 6 FT (1.8m) vertical prime ensures easy installation.

Versatile Applications: The nemesis of low water pressure. Support continuous operation for more than 1 hour. This water pump is suitable for various fields, including RVs, boats, marine applications, irrigation systems, sprinklers, faucets, and more. It is a versatile solution that meets the water pressure needs of different environments and applications.

Product Description

The Water Booster AC Pressure Pump 110V is the perfect solution for anyone looking for a reliable and efficient water pump. This 110v water pump is specially designed for use in the kitchen garden and comes packed with features that make it stand out from the rest.

With precision ball bearings and a built-in automatic pressure switch, this self-priming water pump 110v delivers exceptional performance. With a pressure setting of 50PSI/3.5BAR and an open flow rate of 15.0LPM/4.0GPM, you can enjoy a steady and reliable water supply wherever you go.

If you're looking for a high-quality water pump that delivers exceptional performance and unparalleled reliability, the Water Booster AC Pressure Pump 110V is the perfect choice.

4

Safe & Practical AC Pressure Pump

Provide a good solution for your domestic water use

The pump has certified CE ISO 8846 , stable and serviceable, smooth self priming with silent operation and can run dry without damage, thermal overload and ignition protection

Utility Diaphragm Pump Features

MODEL:F33-203-050-301

PRSEE SETTING:50PSI/3.5BAR

AMPS:0.7A

OPEN FLOW:15.0LPM/4.0GPM

VOLTS:110V

MAΧ AMPS:1.2A

The pump's duty cycle is: intermittently.

Tip: When the pump leaves the factory , a small amount of water may remain in the pump. This is due to rigorous testing of the pump and does not mean that the pump has been used.

How to better protect your pump

First of all, we must use the correct installation method when installing the water pump. To avoid leakage to the pump rotor in case of some product failure, the correct operation is to put the pump head down or flat during.

Secondly, please connect the parts tightly to avoid leakage or use sealing tape in combination with pump filter to better prevent piping and pipe leakage and reduce the risk of water seepage into the pump motor.

Then, periodically check the connections of each component for looseness and leaks.

The pump's duty cycle is: intermittently. Remember! Prolonged overwork will greatly reduce the service life of the pump.

2

1

3

Automatic Pressure Switch

Pressure Switch: Built in automatic pressure switch, When in use, the faucet is synchronized with the self priming pump motor switch. Bring convenience to your life and work.

Adjust Pressure Switch

Factory default setting is 50PSI

Step 1: Open the raised cover and locate the screw hole in the center of the switch.

Step 2: Turn clockwise to increase pressure and vice versa to decrease pressure.

50 mesh strainer

The filter should be installed on the inlet side. It serves to clean and protect the pump.

Tip: Please use sealing tape in combination with our filters and adapters during installation to better prevent piping and plumbing leaks.

water pressure pump 110v

Adjustable Pressure Range

This water pressure pump is adjustable to meet your specific needs, with a pressure range of 45-70PSI. With a 50PSI/4.0GPM design, it delivers consistent water pressure and flow, ensuring a smooth and efficient operation.