Quick Splice Tap splice connector   QSR-50pcs
 


  • Quick splices are a fast and easy way to splice into an existing wire/s
  • No stripping of the wires is necessary.
  • Simply insert both wires into the splice, squeeze down on the metal insert with pliers, and close the cap.
  • Get yourself some of these connectors and a pair of pliers for the  squeezing-splicing portion of the job.
    How To Use: Just place the two wires in the channels, close, squeeze the metal piece down over the wires with common slip joint pliers, and snap closed the insulating cover. (Make sure they are pulled  together with pliers)
  • Suitable for Conductors in the range: 
    Conductor CSA (Cross Sectional Area) 0.5-1.5mm² 
    AWG (American Wire Gauge) 22-16 

 Package Contents:
  • 50x Quick Splice Red

 



Notes *
Note 1. Central Locking
If your central locking system only operates from the drivers door key (not the passengers);
then you will need a   2 wire motor for your drivers door.
 
Note 2. Total Closure / Window Closure
If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed;
then you will need a  window closure module.

Note 3. Boot Release Wire: Trunk  Release Output
Some cars have an electric boot release or one can be added. This can be  interfaced with this kit.
For cars with a built in boot release the wire is  found at the keyless entry module under the dash
or behind a kick panel. If  you want to Convert your manual boot release to electric release;
then you  will need a  Electric Boot Release Kit 

 

Note 4. Cable operated door locks
For vehicles with cable operated door locks, such as Ford, Mercedes  Sprinter/Vito, and some newer cars, You need this additional item:  Allows aftermarket actuators to work with cable door lock systems

  Cable door lock adaptor