eBay

Welcome to NooElec @ eBay!

Product Details
Quantity	1m (3.3') WS2812B LED strip, 60/m

Technical Details
Datasheet
Applications	LED lighting, displays

Product Information
2 year warranty from NooElec! The LED strip has pre-soldered connectors for ease of installation. Not your average RGB LED strip! Not only are these fully waterproofed, but each LED is also independently addressable, opening up entirely new lighting possibilities. This is not average waterproofing, either. It is fully IP68 rated--the strips are covered with a flexible silicon jacket and then filled with epoxy. This ensure that your strips can be used in nearly any environment for years to come! Each WS2812B (WS2812) PLCC-6 (5050) LED is controlled by an WS2811 IC die located inside--nifty, right? We also carry these special LEDs in our store. Each end of the strip has 3 tinned wire leads: Green=5V DC Red=Data/Clock In Black=Ground The male connector is input and the female connector is output. For those who want a ready-to-go solution we sell a highly-configurable RGB controller compatible with WS2811-powered pixels such as these. For you Arduino users we highly recommend the open-source fastspi library as jumping point for your own code. The WS2811 employs a 1-wire serial data connection. ICs are chained together which means whole strings can be controlled using just 1 pin on your microcontroller. For more information we recommend reviewing the datasheet above or contacting us for further technical details.

Product Information

2 year warranty from NooElec! The LED strip has pre-soldered connectors for ease of installation.

Not your average RGB LED strip! Not only are these fully waterproofed, but each LED is also independently addressable, opening up entirely new lighting possibilities.

This is not average waterproofing, either. It is fully IP68 rated--the strips are covered with a flexible silicon jacket and then filled with epoxy. This ensure that your strips can be used in nearly any environment for years to come!

Each WS2812B (WS2812) PLCC-6 (5050) LED is controlled by an WS2811 IC die located inside--nifty, right? We also carry these special LEDs in our store.

Each end of the strip has 3 tinned wire leads:

Green=5V DC
Red=Data/Clock In
Black=Ground

The male connector is input and the female connector is output.

For those who want a ready-to-go solution we sell a highly-configurable RGB controller compatible with WS2811-powered pixels such as these.

For you Arduino users we highly recommend the open-source fastspi library as jumping point for your own code.

The WS2811 employs a 1-wire serial data connection. ICs are chained together which means whole strings can be controlled using just 1 pin on your microcontroller. For more information we recommend reviewing the datasheet above or contacting us for further technical details.