This is a good quality, but inexpensive AM/FM manually retractable replacement chrome aerial antenna suitable for many MG, MGA, MGC, MGB, MGB GT, Midget and Sprite Roadster and GT models, where the panel angle is fairly horizontal, between 0° to 25°.


The aerial requires an under-hang of 27  cm (10.5 inches) and has a mast height of 96 cm (38 inches).

The aerial top fitting is described as "narrow" or "small and is well proportioned with good quality, durable, bright chrome plating. The rubber sealing gasket outer diameter is 30 mm approximately. The aerial top nut is small and inconspicuous, unlike some large topped aerials which seem to dominate the wing and detract from a cars appearance. Full no quibble refund if you are unhappy and return the aerial.


The aerial is suitable to replace most retractable aerials fitted as original equipment or as an after-market replacement. This retractable aerial is an ideal inexpensive solution if you aerial is bent/damaged or suffering from pitted chrome plating. 

 

  • Specification is:
  • Adjustable head so the aerial can be angled to desired angle or rake between 0° to approximately 25°.
  • Four-section chrome 78 cm  (30 inch) chrome telescopic mast.
  • Lockable mast, with keys supplied.
  • Standard medium diameter top fitting 32 mm Ø maximum.
  • Suitable for hole sizes 11 to 25 mm Ø.
  • Mounting depth (under-hang) 27 cm 10.5 inches
  • 115 cm coax cable with male DIN 41585 Motorola type jack plug so normally plugs directly into existing socket by the aerial.
  • Supplied bubble packed & carded.


If you require a lower mounting bracket and fittings to attach more securely to a chassis strut or brace and allow finer adjustment of the aerial masts angle or rake, please see our ebay listing 360427152725 entitled  Manual & Electric Aerial Power Antenna Fitting Fixing Bracket Clamp Kit.


Please note we also list aerial antennas with larger and smaller tops, longer and shorter under-hangs, or to fit higher wing/fender angles. Please see our eBay shop for other options or e-mail us with full vehicle model details (make/model/year) location; front rear wing fender, or detailed application requirements: hole dimensions (circular/oval) and wing angle/profile and available mounting depth/ under-hang.