Leaking water pump? Usually if the pump begins to leak
the majority of the time it will be a failed mechanical seal, this device has a
sacrificial carbon face which fits into the pump housing and works by trapping
a thin layer of product liquid between the two polished faces, when the
shaft/impeller rotate it then creates a seal against the mating face. The mechanical seal is situated between the pump wet
end and electric motor, this forms a seal around the motor shaft to prevent
pressurized liquid from escaping and is the main wearing part of any pump.
A mechanical seal may leak liquid if the pump is ever run dry or eventually
wear out, if not replaced promptly liquid will travel along the shaft and ruin
the motor in a very short period of time.
High
quality replacement standard mechanical seal assembly + O-ring kit, Ceramic and Carbon
faces with Nitrile(NBR), EPDM or Viton® elastomers from leading seal
manufacturers for industrial pumps.
The 'Hard Face' seal kit has Silicon Carbide faces with Viton® elastomers.
Pump nameplate missing? Please send your sample seal for identification or e-mail your seal dimensions.
If unsure of seal face materials or elastomers please quote your pump model and code number.
Seal shaft
size dia. = 22mm Ø
Seal kit options :-
Spare parts suitable for the following pump models :-
FHE series |
FHS series |
FHF series |
FHE4 series |
32-125 |
32-125 |
32-125 |
40-250/11 |
32-160 |
32-160 |
32-160 |
40-250/15 |
32-200 |
32-200 |
32-200 |
50-160/11 |
40-125 |
40-125 |
40-125 |
|
40-160 |
40-160 |
40-160 |
FHF4 series |
40-200 |
40-200 |
40-200 |
40-250/11 |
40-250/92 |
40-250/110 |
40-250/110 |
40-250/15 |
40-250/110 |
40-250/110A |
50-125 |
65-160/11 |
50-125 |
50-125 |
50-160 |
|
50-160 |
50-160 |
50-200 |
FHS4 series |
50-200 |
50-200 |
65-125 |
40-250/11 |
65-125 |
65-125 |
65-160/110A |
40-250/15 |
65-160/92 |
65-160/110A |
65-160/11 |
|
65-160/15 |
|||
|
|||
|