Multibond Super Strong Adhesive for Wood, Metal and Plastic STEEL EPOXY 4 Minutes Glue 10g
Ideal for Large Areas and Assembling Components on Metal, Wood, Masonry, Ceramics, Glass and Hard Plastics
Capacity: 10g ( 5g + 5g).
High quality.
Quality Guaranteed!.
FREE Plastic Brush.
Note - Please note that the box may be damaged during shipping.
Multibond Super Strong Steel Epoxy 4 Minutes
Multibond Super Strong Steel Epoxy 4 minutes is recommended when a high bond strength is required. This two – component gap filling epoxy adhesive provide tough and durable bonds on most materials in common use. (Does not bond polypropylene or polyethylene) Super Strong sets in approximately 6-8 hours. High bond strength is attained after 3 days.
DIRECTIONS:
Surfaces to be repaired should be clean, dry and free from grease. For best adhesion scrape and sand the surfaces and clean with acetone.
Unscrew caps of each tube and pierce with own cap to avoid contamination.
Dispense equal amount (1:1) of resin and hardner (parts A & B) on to a clean disposable surface and mix thoroughly. The mixture will remain usable for 3-4 minutes.
Apply to surfaces to be repaired and allow to harden.
To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle.
SAFETY DIRECTIONS:
Avoid contact with eyes and skin. Avoid breathing its vapour. Wear eye protection and protective gloves when mixing and using.
If poisoning occurs, contact a physician. If swallowed, DO NOT induce vomiting. Give a glass of water. If skin contact occurs, remove contaminated clothing and wash skin throughly. If in eyes, hold eyes open, flood with water for at least 15 minutes and contact a physician.