This listing includes a complete fog lamp kit for use on the model listed in this listing without the factory fog lamps or as a replacement for existing factory fog lamps. This listing includes everything needed to install and requires no other parts or extensive modification. The optional chrome bezels are not included or needed in order to install. The lamps are compatible with the optional factory fog lamp bezels. The BL-1038w outperforms regular fog and driving lights in any weather condition. 90 degree beam pattern is both wide and far reaching, die-cast metal housing 55W H3 xenon 4100K white bulbs, 2.5" lamp enclosures, heavy-duty mounting brackets, LED illuminated controller, relay and deluxe wiring harness included. BlingLights is one of the true leaders in the lighting industry. They produce Top notch lighting equipment. BlingLights lamps stand out as "lights with attitude".
BL-1038w Light Kit Specs:
» (2) 55 Watt 4100K Xenon Lamps
» Photometrically Designed Hardened Glass Lenses
» Die-Cast Metal Housings
» Heavy-duty mounting brackets
» LED Illuminated Controller
» Plug-In Wiring Harness w/ Relay & Fuse Included
» Installation Directions Included
» 5 Year No Fault Warranty
» MSRP ~$357
Receive a FREE Authentic BLINGLIGHTS Cap Valued at $24.95 With Your Order While Supplies Last
Risk-Free Trial
Take the BlingLights Challenge® and try any BlingLights product no-risk. Then Decide. If you don't love it, you don't keep it.® No obligation. Simply send it back, no questions asked - you keep the free gift
Frequently Asked Questions
Are these fog lights original equipment manufactured? No, these fog lights are manufactured by BlingLights. Many of our customers are able to install our fog light kit in a period of approximately 45 minutes to 2 hours. More involved installations may require drilling to position the lights where you want them. This kit includes mounting brackets that mount independently of the factory mounting points. The end result will be a clean look if done with care. For those uncomfortable with the install, have the kit professionally installed at a local car stereo shop.
Does the BL-1038w Lamp kit include everything I need? Yes, the kit includes 2 lamp enclosures, powerful H3-55 watt 4100K bulbs, fully adjustable mounts for bumper or bar, harnesses, pre-assembled wiring harness, relay, fuse, electronic switch, mounting hardware kit, installation instructions, and more.
Can I hook the lights up to my factory light switch instead of the included controller? Of course, just run the wire to the factory switch instead of the included controller. The included controller can also be substituted with other switches available through BlingLights.
What type of bulbs come with this kit? Two powerful, genuine BlingLights H3 bulbs with an output of 55 watts a piece, 110 watts total! These bulbs are designed for maximum output and durability. The bulbs generally last many years without the need for replacement. There is a good chance the bulbs will outlast the life of the vehicle. H3 replacement bulbs are a common size bulbs and can be purchased through us or anywhere else automotive bulbs are sold.
What is the BlingLights No Fault Guarantee? BlingLights will repair, or at our option, replace this product for up to 5 years from time of purchase. The NO FAULT provision of this warranty means that regardless of how the item may have been damaged or rendered unusable (fully or partially) by the Owner of the item, BlingLights will repair or replace the item without any questions being asked. To take advantage of this provision include $25.00 (U.S. dollars) with the item to cover inspection, handling, and return shipping.
What is the return policy? You are entitled to a full refund less shipping costs if item is mailed back within 30 days of receiving item. Item must be in the EXACT brand new condition it was received along with the auction item number and reason for return. Keep the free gift just for trying our product even if you decide to return. Please give us opportunity to fix any problems before deciding to return.
Customer Feedback Letter 1:
Added Blinglights BL-1038W today and along with using the the GM bezel to give it the OEM look and it looks and works great!
Had to reshape the chrome (plastic) bezel to make the light fit good. Reemed out about 3/8 of an inch set the lights in and adjusted for up/down and left/right. Then epoxied them in so they would not move. Just checked it out at night and the results are GREAT!. I also have changed the low beam bulbs. I have good experiences in the past with this brand in my Impala SS and Envoy. Better brightness than stock. GM/Chevy really dropped the ball on stock lighting. Oddley enough my high beams on the Encore are VERY bright and acceptable. Wiring was very easy with the exception of the supplied wires were to short and had to splice . No problem. Also changed the switch that was supplied thru Blinglights with a rocker switch from NAPA. It is a rocker with a green light and I mounted it just above the the round dial for the interior light adjustment. Power comes from a hard wire to the interior fuse box so that I can turn on and off at will and it will go off when I turn the ignition off.
Customer Feedback Letter 2:
I owe you this response from last summer. it has taken this long to get my lights installed, because I used my auto tech-spert rather than a stereo shop. I wanted you to see the results. Yet, my guy is as artistic as he is mechanical, but its worth the wait
Here we go.
He used the same materials, heavy gauge stainless steel whatever-piping-conduit-exhaust heavy stuff, to mount a housing for my fog lights - and for my dual exhausts which he installed at the same time. Both the front and back are clear coated and look really good. He opted to retain the large synthetic black plugs in the front which normally cover the fog light holes in the Encore, and meticulously carved out holes in the plugs to embrace the chrome-like-steel housings. This way we could decide how far out, or in, we wished to have the (now) chrome housed fog lights to be set. Back in, or protruding out.
We decided that "in" was pretty common, but that 'out' would catch one's eye, somewhat balancing with the extended dual exhaust.
I am enclosing a couple pics of the car after installation was complete. These are before the car was detailed and polished.
Thank you for your explanations last summer - hope you enjoy seeing how a crossover can be jazzed with your product, another way.
My techspert-mechanic is Rodney Anderson, Anderson Automotive, in New Castle, Pa.
Best
Wayne Bissell
Fast Shipping, Handling, and Insurance
Discounts available for combined purchases
Designated trademarks and brands are the property of their respective owners.
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.