This product is mainly composed of
Intelligent DC voltmeter and DC relay control module, not only to achieve a
precise measurement of the DC voltage, also according to the limits set
voltage, various delays, timing and timing loop combine functions.
This product use of three bright LED
digital display, slot-type installation. Simple and flexible to control a
variety of systems, It is widely used in the battery charge and discharge
control (inverters, UPS, backup power and a variety of DC electric equipment).
The car battery control, electric vehicles, power supply control, motor
control, solar power systems and over-voltage protection. Products designed in
strict accordance with the relevant national standards and electrical safety
rules.
Performance
parameters:
1. Display:
3 digits 0.56” red LED
2. Operating
power: DC10-15V
3. Voltage
measuring range: DC 0.0~99.9V
4. Measurement rate: ≥ 500mS / times
5. Measurement
accuracy: ± 1 class
6. Timing
range: 0~999 seconds or 0~999 minutes (optionally)
7.
Standby current: 15mA, 10mA (relay disconnect), 45mA (relay pull)
8. Operating
temperature: -10 ~ 65 ℃
9. Power-off data save function
10. The upper
and lower limit of voltage flashing alarm function
11. The
relay default status: pull or disconnect (optionally)
12. Dimensions: 48 × 29 × 35 mm
13. Cutout: 46 × 27 mm
14. The relay
parameters:
-Coil
rated working voltage: 12V
-A
set of conversion (normally open and normally closed)
-Contact load: 10A/250VAC or 10A/30VDC
-Contact resistance: ≤ 100mΩ
-Contact pull time: Max. 10msec
-Contact
release time: Max. 5msec
-Mechanical durability: 10 millions
Package:
1 x 0.56” red LED digital voltage timing delay relay
control panel meter
Remark: Note: The instruction
will share a link for reference when purchased this meter
It’s not enclosed in the package.
|