Buy recommendations:

Solenoid valve：V  Series, DV  Series    

Longer service life and more power saving. Quite suitable for use in such as greenhouses or spray system and other frequent watering environments.

Ball vale：LSeries,  S Series, T  Series   

Can operate at ZERO water pressure. Suitable for use in rain barrels 

Battery & Hose connector not include

Feature:

1. Solenoid switch : life about 300,000 times. 

    According placed. Life is approximately 5 to 10 years,

2.  Applicable frequent spraying systems, gardening watering.

3.  Simple assembly of parts is not easy to have a fault.

4.  Regulator circuit design, the battery can be used with any brand.

  .  Circuit board using Polymer Aluminum Solid Capacitors. Capacitor Life about 200,000 hours (65 ° C) (version 2016)

5.  Works with  high  pressure (3~145 Psi) 

6.  Connector Specifications: 

     US         : 3/4 Inch

     Europe : G 3/4 (26.5mm)

8. 2 different watering setting mode
    i. up to 9 different start times per program
    ii. 1 available periodically watering setting
9.Set Auto-off time (day or time,with periodically watering setting)

10.If the water quality is dirty, clean up easy removal (for experienced people)

[Raining stop Function ]
there are a water collecting area on top. you must put timer on outdoors. timer will stop immediately when raining. and it will not work untill next running time after water collecting area is dry.

[solar charge Function ] After inserting chargeable battery, it will be charged by solar panel on the timer (need to put it under the sun)

Instructions

A     SOLAR CHARGE (Use 2*AA Rechargeable Battery)

B、Two kind of watering setting mode

1. periodically watering

Press SET/OK .   starts to blink and press  <!--[if !supportFields]-->+<!--[endif]--> or <!--[if !supportFields]-->-<!--[endif]--> to set the ninth watering setting . set the  Cycles (frequency) and  Run time. It will start work in next time that you set up.

 

2. 9  watering settings

We can set eight watering time, The first, you must be set up current time , and go on next setting, press <!--[if !supportFields]-->+<!--[endif]-->into and select 1~8 one of them to set up the start working time and run time, after set to complete, It will start working. 

 

C、Exception watering setting

 

Set up some time of the day or some days of the week not to water

 

01.Press SET/OK . ( starts to blink and it is in the mode of setting watering time.)

02.Press <!--[if !supportFields]-->+<!--[endif]--> key twice. ( starts to blink and it is on the exception setting mode)

03.Press SET/OK key. ( or  starts to blink and press <!--[if !supportFields]-->+<!--[endif]--> or <!--[if !supportFields]-->-<!--[endif]--> to choose off mode )

04.Press SET/OK key.  Set up the start and end time not to water.

05.set up the day of the week not to water.

06. Press AUTO/EXIT key twice back to the standard mode.

 

   EX : Set up the start time at 6:00 PM, the end time at 9:00 AM and it shows SU MO WE TH SA. It means

       From 6:00 PM to 9:00 AM will not water and it will not water on Tuesday and Friday, either.