eBay

A/C Compressor Clutch Bearing 35mm ID x 52mm OD x 12mm - New

Check Vehicle Fitment

Use the compatibility chart or send us your VIN to confirm that you are purchasing the correct part for your vehicle.

WHAT'S INCLUDED

Please read all fitment information provided above to verify your vehicle has the correct parts. Our new Clutch Bearings are made to meet or exceed OEM specifications.

JOIN THE THOUSANDS OF HIGHLY SATISFIED CUSTOMERS

New A/C Compressor Clutch Bearing

QUALITY DIFFERENCE

GET WHAT YOU PAY FOR

Our new bearings are only included in applicable listings. Always check the "What's Included" section for more information on our bearings. Compared to our competitors, our new bearings are unmatched in the market.

MAKE SURE YOU ARE ORDERING THE RIGHT PART

Our bearings go through heavy testing to ensure a noise-free lifespan. Validated for fit, form, and function to OE standards.

HIGHEST QUALITY VALUE FOR YOUR MONEY

Bearing failures are usually caused by system problems. Very seldom is a bearing itself the culprit of a failed or locked up compressor. For example, if the clutch slips severely due to a high pressure or low voltage condition, or due to compressor slugging, the excessive heat generated by the slipping will quickly melt and destroy the bearing seal. The bearing then loses its grease and locks up or falls apart, usually destroying the clutch in the process.

BEARING RELATED FAILURES

If the complaint is noise related only, a defective clutch pulley bearing could be the source of the problem. Check for a rough or poorly operating bearing by holding the clutch armature hub stationary, and rotating just the pulley. If excessive noise or difficulty in ease of rotation is observed, the bearing may be suspect. However, as with the failed bearing situation described above, several factors can cause the bearing to become noisy or rough in operation.

A rough bearing can also be one that is in the early stages of failing due to system problems involving extreme heat. This is usually the case if the compressor clutch has been operating sufficiently for some time and then becomes noisy. Most factory bearing defects become evident in the first hours of compressor operation.

NOISY BEARING

USA FAST SHIPPING

SHIPS SAME DAY

FAST AND FREE

ORDERED BEFORE 2:30 PM EST

ABOUT US

NORTH AMERICAN AUTOMOTIVE A/C SUPPLIER

Compresores Miami, Inc. specializes in remanufacturing a/c compressors and general auto a/c repairs. Compresores Miami, Inc. also supplies new vehicle specific components such as compressors, condensers, evaporators, expansion valves, orifice tubes, liquid lines, refrigerant lines, orings, etc.

"At Compresores Miami, the main priority is our customer's satisfaction"

- THE COMPRESORES MIAMI TEAM

WARRANTY

1 YEAR / LIFETIME WARRANTY

WARRANTY CLAIM

Unless otherwise specified, our new bearings come with a lifetime warranty. The warranty covers a one time replacement.

The warranty only covers the bearing. The warranty does not cover normal wear and tear or damage caused by negligence, lack of maintenance, abnormal operation, track racing, off-road use or improper installation. The warranty does not cover anything else including labor, removal, installation, diagnostic and any other contingent expenses.

Warranty will be VOIDED if the condenser is returned with severely damaged fins or contaminated.

In order for warranty on a compressor to be considered, you must return the item with the following documents:

1. Proof of Purchase

2. Invoice from certified mechanic or shop

The buyer is responsible for covering the shipping costs.

CM eBay

A/C Compressor Clutch Bearing (New)

Important Notes

If you need assistance to make sure that this part will fit your vehicle, please send us the VIN and/or the year, make, model and engine size of your vehicle so that we may confirm it for you. We also recommend using the compatibility chart in order to make sure that this compressor will fit your vehicle.

The item pictured might be slightly different from the actual product sent. It may require the use of the OE manifold as it is a majority of the time not included. You may also need to splice the connector. If you have any questions regarding the product, please do not hesitate to contact us directly.

Shipping Payment Returns Contact Us Tech Info

We understand how important it is to have A/C in your vehicle and this is why we always ship our products the SAME BUSINESS DAY

*Orders must be placed before 2:00 PM EST during hours of operation*

We offer free shipping across 48 contiguous US states via FedEx Ground, Home Delivery or USPS.

Estimated delivery for free shipping is typically 2-5 business days
*Shipping estimate does not include weekends and/or holidays and can depend on your location and which warehouse your order is shipped from.*

Expedited and international shipping options by FedEx Express or USPS Priority Express are also available and requires additional shipping charges.

Alaska, Hawaii, Puerto Rico, APO/FPO, US territories addresses: USPS Priority Mail, may require additional shipping charges.

*Ground shipping delivery estimates cannot be guaranteed.*

We gladly accept returns for any uninstalled item within 30 days of purchase.
Returns are subject to a 15% restocking fee and deduction of the original shipping cost.
The buyer is responsible for return shipping unless it is a warranty issue within 30 days of purchase.
If the item fails after installation or the wrong item is sent due to shipping error, we will arrange to get you a replacement item once the item is received and examined. - see Warranty for details.

Please send us a message via eBay. We will respond within 24 hours during hours of operation.

Hours of Operation: Mon-Fri: 9AM-5PM EST

If you’re replacing an A/C Compressor, you have to be prepared to replace additional components in the system depending on the reason why your own compressor failed. The information provided below was made to help you save TIME and MONEY. Here are some examples of common issues:

1.) Compressor locked/seized internally:
If your compressor seized internally it was due to insufficient refrigerant or oil in the system or the system was blocked, leading to overheating of the compressor which caused a breakdown of internal parts.

Visible symptoms:
The oil in the compressor is black and/or has aluminum particles in it. The belt snapped or when the a/c is turned on, the engine feels like it’s going to turn off.

What you should do:
1. Replace the A/C Compressor (make sure to add PAG Oil)
2. Replace the Receiver Drier/Accumulator
3. Replace the Expansion Valve/Orifice tube
4. Flushing the a/c lines, condenser and evaporator is REQUIRED (We professionally recommend to replace the condenser on modern vehicles since the passage on the fins are so small that a flush will not remove all contaminants).
5. Vacuum the system for 30 – 45 minutes. This will remove any moisture in the system.
6. Add the correct amount of refrigerant to the system.
7. Run vehicle on lowest fan setting for about 3 minutes to allow the compressor to cycle the refrigerant and oil.

The reason why it’s important to replace the additional parts listed is because if you add a new compressor to a contaminated system, the compressor will cycle the contaminants and will eventually lock up again.

2.) Compressor is making noise:
There are two possible reasons why your compressor is making noise. First being that the compressor is suffering from internal damage due to a lack of refrigerant or oil in the system. This is an early sign that the compressor will seize, please go back to the first example and follow the instructions. The second reason is that the bearing on the compressor is bad.

Visible symptoms:
The compressor makes noise when the a/c is on or off, the clutch has a red/brown discoloration caused by overheating.

What you should do:
With the right tools and some mechanical knowledge, you can replace the bearing on the compressor without having to remove it from the vehicle. We carry almost all bearing sizes for a/c compressor clutches. Please contact us and we will provide you with the item number so you may purchase the clutch bearing.

3.) Compressor does not engage:
If the compressor does not engage even though the system is properly charged, the coil may no longer be functional. This can be an electrical issue of the vehicle or the coil may have suffered from overheating of the compressor.

Visible symptoms:
The epoxy in the coil has bubbles, cracks and looks “dried out”.

What you should do:
Replace the clutch assembly or the a/c compressor. Please contact us for availability.

4.) Compressor is leaking:
Compressors can leak due to various reasons. This can happen if the compressor overheats, obstruction in the system and overcharging the system.

Visible symptoms:
UV dye is found on the shaft or body of the compressor.

What you should do:
Replace the compressor and conduct a leak test in order to ensure that there are no other leaks in the system.

Note: These are the most common issues found when it comes to a faulty compressor. We always advise that you take your vehicle to an ASE certified mechanic that is able to properly diagnose your a/c system and determine the problem. There are other problems that may be present in your system which may not be listed on here. If you still have questions, do not hesitate to contact us, we are here to help.

Tips:

- CONTACT US. We are dedicated professionals that only deal and specialize in automotive air conditioning. We can assist with any installation questions, system capacity requirements and have all additional parts for your a/c system.
- After checking or filling the oil, turn the clutch on the compressor 10 times to distribute the oil inside.
- Always check how much oil the compressor contains even if it’s brand new. You do not want to end up doing the job twice simply because there was an insufficient amount of oil added to the compressor.
- Replace the schrader valves anytime you service your a/c system.
- Check relays and pressure switches.
- After flushing, make sure that there is no flush liquid in the system by using compressed air or nitrogen.
- Make sure the condition of the condenser is so that the performance is sufficient to maintain proper temperature in