30 Plate Heat Exchanger with 1 ¼” Threaded Nipples
BEWARE
OF LESS THAN 5X12 INCH MODELS AS THE CORRECT FITTINGS ARE VERY HARD TO
INSTALL ON THE SMALLER SIZE. OURS ARE 5X12 INCH SO THERE IS PLENTY OF
ROOM TO INSTALL THE FITTINGS ON OUR UNIT.
Our large style 30 plate is 12" long! Don't be fooled by smaller units and don't settle for less quality! These are heavy built quality units, NOT the cheaper 304 Stainless Steel!
Overall dimensions: 5" wide, 12" long with 1 1/4" threaded (MPT) nipples.
Maximum pressure 435.
Maximum temperature 437 degrees Fahrenheit.
The feed and return is 1 1/4" MPT.
TECHNICAL
DATA:
Type:
Brazed Plate Heat Exchanger
Plate
Material: ASTM 316L Stainless Steel
Dimensions: 12" long x5"
wide (see the photo below for reference: a x
b
sizes respectively)
Outlet sizes: 1 1/4" Male IPS (MPT)
threaded nipples, ASTM standard
Min. operating temperature: -256
F
Max.
operating temperature: 437
F
Max.
design pressure: 435
psi
How to buy a brazed plate heat exchanger
The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. Sizing is not just about the amount of plates, but also the area for heat transfer!
The port size is important! Most furnaces use 1" tubing, so make sure you are not buying 3/4" ports. This will decrease water flow to the rest of your system. Ours are 1 1/4 inch!
Make sure you properly size your heat exchanger. Here is a guide based on the larger 12" exchangers.
Make sure that you have a good warranty, and that the person you are buying from is reputable and knowledgeable. Others may not be there to service you down the road.
Below is a guide to help you. If there is any question, ALWAYS buy the next size larger. It is always better to have more than enough heat, than not enough! Again, all items above are based on a 12" length and 1" ports.
A. 10 plates are used for domestic hot water or small in-floor heating
applications of less than 1100 sq ft. These will work with the largest of
domestic hot water systems and should never need to be larger unless you
use your domestic hot water for more than 3 hours straight at one time.
B. 20 Plates are used for smaller homes from 1100 - 2500 sq ft.
C. 40 Plates are used for larger homes from 2500 - 4500 sq. ft.
D. 70 Plates are used for areas 5000 - 7000 sq ft.
This is the best quality on the market for better efficiency and longer life.
110% price guaranty!
If you find the same item 'buy it now' priced on ebay for less and you buy our same item, we will send you a 110% of the difference. Good only at time of purchase. To get the refund, simply send us the current item # of the item you have found for less and we will send you the refund! Item may not be an expired listing.
Over 10 years experience!
This
is all we do, so contact us and let our knowledgeable staff help
you get your project done right!
Warranty
Customer is responsible all shipping charges for warranty including on the new exchanger.
This unit comes with a lifetime waranty against manufacturers defects.
Shipping
Fast shipping! We ship out the same day as we receive payment or the next business day if purchased on a weekend or holiday. Same day shipping is only available as long as you have sent us all the correct information at the time of payment.FEDEX ground 2-3 days fully insured and properly boxed to insure safe arrival at your home. Free shipping is for the US lower 48 only. All others must contact us for quote or check on the shipping and payments tab.
Service
We offer service even after the sale! 7 days a week!
Over 10 years experience! This is all we do, so contact us and let our knowledgeable staff help you. Tired of talking to dealers and sellers who don't even know their own products? Unlike others, we service what we sell! Our feedback is earned!
Thank You
We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! Do not hesitate to contact us with any questions or concerns!