NOTE: We cannot guarantee this will work with your solar panels. It is up to you to look at the datasheets and provided information to determine if this will work with your panel! A 2.1mm adapter may be required to adapt a solar panel to the DC power jack.

Make your projects to go green this summer with our specialized USB/Solar Lithium Ion Polymer Battery charger! This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. We've spent over a year testing and tinkering with this charger to come up with a plug and play solution to charging batteries with the sun and we're really pleased with what we ended up with.

Easy to use! Pick up any of our many 3.7V/4.2V LiIon batteries. Plug the battery into the BATT port using a 2-pin JST cable and the solar panel into the DC jack using a 2.1mm terminal block adapter. Put the solar panel outside (and keep the battery out of the sun, it needs to be kept cool!) to start charging. You can power another project like a Mintyboost at the same time by connecting to the LOAD output port

Adafruit has carefully designed this charger specifically for solar charging, and will automatically draw the most current possible from the panel in any light condition!

Even thought it isn't a 'true' MPPT (max power point tracker), it has near-identical performance without the additional cost of a buck-converter. Adafruit's detailed tutorial in the Adafruit Learning System (Ebay will not allow a link) on how to use this charger includes a design document explaining how it all works.

Best for use with the Lipoly/LiIon batteries we carry! Other batteries may have different voltage, chemistry, polarity or pinout. If you are using this on a different battery then it is up to you to know what you are doing and not just guessing or plug and pray.

Comes with an assembled charger board, a 2-pin JST cable that will fit into either the BATT or LOAD ports, and a large stabilization capacitor that must be installed in your finished project. Does not come with a Lipoly battery or solar panel.

• 3.7V/4.2V Lithium Ion or Lithium Polymer battery charger
• Charge with 5-6V DC, USB or 6V solar panel!
• Too dark out? Use a USB mini-B cable or a 5V DC adapter
• Automatic charging current tracking for high efficiency use of any wattage solar panel
• Three color indicator LEDs - Power good, Charging and Done
• Low Battery Indicator (fixed at 3.1V) with LED output
• Set for 500mA max charge rate, can be adjusted from 50mA up to 1A by soldering in a resistor
• Will always draw the most current possible from a solar cell - up to the max charge rate!
• Smart load sharing automatically uses the input power when available, to keep battery from constantly charging/discharging
• Temperature monitoring of battery by soldering in a 10K NTC thermistor (not included) - suggested for outdoor projects where the battery may get hot (50°C) or cold (0°C).