Brand New Original FLUKE 107 Palm-sized Digital MultiMeter

Attention notice

Our aim is to make you happy and satisfy in our store totally, providing the best product and best service. However, there still some problem happen. Items may be broken during the shipping way or item can not work or compatible with your items suitable. If such anything or any problem happened, please send a message to us by ebay or our email. Firstly and directly, before leaving any feedback or open any dispute. Please give us the opportunity to resolve the problem. We must guarantee you 100% satisfaction in our store.

If you want buy much quantity or any other type item you like, please contact us by our email, or ebay message we can supply you, and give you much more discount, the super quality and service. Tks!


Please note: 

Since 2016, fluke 107 Change to Chinese trademark "福禄克" （Fluke spoke Chinese is 福禄克） 

So China Fluke manufacturers don't provide printed English user manual. 

Please find the English user manual in Fluke website.

The Fluke 107 digital multimeter is made to fit the way you work! It is designed to fit in the palm of your hand and go with you no matter where your job takes you.

  • Voltage, resistance, continuity, capacitance
  • Input terminal for ac and dc current measurements to 10 A and current
  • Backlit display
  • Data hold
  • Diode test, plus frequency and duty cycle measurements

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of: ±([% of Reading] + [Number of Least Significant Digits])


Accuracy Specifications
AC Volts 
(40 Hz to 500Hz)1		RangeResolutionAccuracy
6.000 V
60.00 V
600.0 V		0.001 V
0.01 V
0.1 V		1.0 % + 3
DC Volts6.000 V
60.00 V
600.0 V		0.001 V
0.01 V
0.1 V		0.5 % + 3
AC Millivolts600.0 mV0.1 mV3.0 % + 3
Diode Test22.000 V0.001 V10 %
Resistance 
(Ohms)		400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ		0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ		0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3
Capacitance350.00 nF
500.0 nF
5.000 μF
50.00 μF
500.0 μF
1000 μF		0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF		2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5
Frequency4
Hz
(10 Hz – 100 kHz)		50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz		0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz		0.1 % + 3
Duty Cycle41 % to 99 %0.1 %1 % typical 5
AC Current
(40 Hz to 200 Hz)		4.000 A
10.00 A		0.001 A
0.01 A		1.5 % + 3
DC Current4.000 A
10.00 A		0.001 A
0.01 A		1.5 % + 3
  1. All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
  2. Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
  3. Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).
  4. All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
  5. Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10 % and 90 %
FunctionOverload ProtectionInput Impedance (Nominal)Common Mode Rejection RatioNormal Mode Rejection Ratio
AC Volts600 V 1>10 MΩ <100 pF 2>60 dB at dc,
50 Hz or 60 Hz		−
AC Millivolts600 mV>1M, <100 pF>80 dB at 50 Hz or 60 Hz−
DC Volts600 V 1>10 MΩ <100 pF>100 dB at dc,
50 Hz or 60 Hz		>60 dB at 50 Hz or 60 Hz
  1. 6 x 105 V Hz Max
  2. For mV (AC), input impedance is approximately 1 MΩ.
General Specifications
Maximum Voltage Between any Terminal and Earth Ground600 V
Display (LCD)6000 counts, updates 3/sec
Battery Type2 AAA, NEDA 24A, IEC LR03
Battery Life200 hours minimum
Temperature
Operating0 °C to 40 °C
Storage-30 °C to 60 °C
Relative Humidity
Operating HumidityNon-condensing when <10°C
≤90 % at 10 °C to 30 °C; ≤75 % at 30 °C to 40 °C
Operating Humidity, 40 MΩ Range≤80 % at 10 °C to 30 °C; ≤70 % at 30 °C to 40 °C
Altitude
Operating2000 m
Storage12,000 m
Temperature Coefficient0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
Fuse Protection for Current Inputs11A, 1000V Fast Fuse, Fluke specified part only
Size (HxWxL)142 mm x 69 mm x 28mm
Weight200 g
IP RatingIEC 60529: IP 40
SafetyIEC 61010-1: 600 V CAT III, Pollution Degree 2
Electromagnetic EnvironmentIEC 61326-1: Portable
Electromagnetic CompatibilityApplies to use the Korea only.  Class A Equipment (Industrial Broadcasting and Communication Equipment)1
1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.


Model NameDescription
Fluke 107Includes:
  • Fluke 107 Palm-sized Digital Multimeter with Frequency, Diode Test
  • Test Leads
  • User's Manual


Note: This meter is made by FLUKE in China.


Payment:

Please use Paypal for the payment.

Shipping:

The item will be shipped out in 1~3 business days after payment cleared

We’ll notify you the order status and shipping info, the time shipped, the tracking number and the tracking website once it’s been shipped. If you don’t receive the email from us (thru eBay), please check your spam folder. Please contact your local post office for missing or damaged package. We ship USPS, UPS or Fedex depending on the item.

Feedback:

Once we receive positive feedback from you we will do the same for you.  We want to be sure you are 100% satisfied with your purchase. Please contact us if there are any questions or concerns about your purchase first.

Return:

We offer a 14 days money back guarantee. Please contact us through ebay email before returning any items.   

1.    We don’t provide return label.

2.    Please make sure item and its packing in good condition, and can be sold in the future. 

There is no marks on the item, not alternated. 

Return items should include the original packaging and accessories.

Otherwise, we feel sorry that we could not be able to return full payment.

3.    Please put a paper in the package, on which your ID number, purchase date and reasons for return should be marked.

4.    Buyers are responsible for the return shipping costs under any circumstances.