Store category

Sign Up Now !

You may also like

Wayinhouse

Product Description

Note: This product is a DIY Kits, buyers need to own welding. DIY risk, novice buy carefully, If it is man-made damage, we do not assume responsibility, Thank you for understanding.
 
This item can use in T12 T2 T13 T15 heating core. auto sleep, ball bearing vibration. Blue light white word.
1. GX12-5 core airline seat : T12 negative vibration switch SW connected to the positive E + T12 T12 shell access (ground)
2. Connect 12-20V DC: if received more than 20V power supply, the board should be put on the back of 1206,100 ohm (101 marks) of the resistor removed. max can use 24V 3A 72W, please you see below picture.
3. Heat indicator light when heated. (After the temperature reaches the set value of this light has been flashing)
4. Temperature Calibration: When digital display temperature and actual temperature T12 rotated clockwise low. Counterclockwise rotation is low.
5. Heating : normal use, press the encoder clockwise, it is heating mode, increasing 50 ℃ in the existing basis.
6. Sleep : normal use, press the encoder, counterclockwise rotation, is the sleep mode, T12 maintained at 200 ℃ SW or no low after 3 minutes, you can also enter dormancy. Cancel the sleep mode, you can press the encoder or rotary encoder look, or pick T12 SW negative.
7. Adjust temperature : when adjust temp, LED light.
8. Encoder : can be rotated 360℃
9.Internal parameters (already set up, no longer needs no special settings)
 
Press and hold the encoder key, boot into the internal parameter settings:
- P01 ADC reference voltage (obtained by measuring the TL431)
- P02 NTC correction (by setting the temperature to the lowest reading on the digital observation)
- P03 op amp input offset voltage correction value
- P04 thermocouple amplifier gain
- P05 PID parameters pGain
- P06 PID parameters iGain
- P07 PID parameters dGain
- P08 automatic shutdown time setting 3-50 minutes
- P09 restore factory settings
- Stepping P10 temperature settings
- P11 thermocouple amplifier gain
 
Common troubleshooting methods:
1. The digital display is unstable, not stable at the set temperature. If you use the new common T12, since the new tip without internal heating element will be the case temperature of high-temperature aging bounce. Solution powered 350-380 鈩?3-5 minutes, then power, power.
2. For SW missed vibration switch, the controller automatically after three minutes into hibernation 200 鈩? if it feels inconvenient, SW and T12 + connected capacitor 104 to cancel the sleep function.
 
Measuring Machine normal, lights and display status:
1. Unplugged T12 tip, turn the light flashed off, show SER, 1 seconds after the display 500.
2. T12 plug tip, boot light uniform flashing, indicating rapid heating from room temperature generally show the set temperature to rise, approaching the set temperature, strobe lights. Indicator is not flashing or intermittent flashes, indicating that the tip temperature reaches the set temperature or alternating temperature compensation.
3.Power (third column) is determined by the voltage (first column), as long as the current reaches the minimum current (second column).
 
Package Contents:
- 1x Digital Soldering Iron Station Temperature Controller
- 1x GX12-5 core seat
- 1x Vibration switch
- 1x LED
- 1x Knob
1. We accept Paypal only as it is the most convenient and safest way to pay and get paid.
2. We only ship to the confirmed address provided by eBay. Please make sure your address in eBay matches the address you would like us to ship to before you make the payment.
3. eBay System will open an unpaid case automatically if the payment is not made within 5 days for those who have no contact with us via eBay Message. If you want us to cancel the transaction, please remember to contact us in advance to avoid the unpaid strike.
1. For the US buyers, we will send your item via e-packet, it usually takes 7 to 12 working days to arrive.
2. For the German buyers, we will send your item via DHL Economy Shipping, it usually takes 20 working days to arrive.
3. For other buyers, we will send your item via China Post, Singapore Post, or HongKong Post, it usually takes 20 to 40 working days to arrive for most countries. For the country like Russia, Brazil, Chile, Italy, Portugal, and South Africa, it usually takes 30 to 50 working days to arrive. Your patience and understanding is highly appreciated.
4. If you need a tracking number,please choose "Standard Int'l Shipping", it means shipping with a tracking number, you only pay it one time, and you can buy whatever you want, we can ship it for you together with a tracking number. Before you make the payment, please feel free to contact us and we will revise the price for you.
5. If you want fast shipping, please choose "Express Int'l Shipping". We will ship the parcel via DHL, UPS, or Fedex.
***Import duties, taxes and charges are not included in the item price or freight. It's your responsibility to take this fee if occurs.
***Return Policy
1. If the item you received is defective, we are happy to replace faulty goods or cover return shipping fee or offer reasonable solution;
2. If we send the wrong item to you, we will cover return shipping fee or offer reasonable solution;
3. Original and return shipping fee will not be refunded or reimbursed unless for the defective items. Please do not complain about having to ship back at your own expense under the condition you choose the wrong item, wrong size, or exchange it for other reasons.
We're the experienced and professional seller who aims to provide you the good quality products with the best price and customer service. Just choose us, you won't regret!
Should you have any question, just email us via eBay message. We try our best to reply to your emails ASAP. However, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response. We feel very appreciated for your cooperation and understanding.
PushAuction