1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2 mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Specifics:
Voltage: <A>220 V/50 Hz±10%, <B>110 V/60 Hz±10%
Power: 500 W
Rotational Speed: 2800 rpm
Dimensions: 44×35×35 cm
Weight of the dental trimmer: 20 kg
SKU: JT-D-19-110
Content:
1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment With necessary parts