TOP QUALITY WINDOW TINT FILM KIT.

OUR FILM MEASURES: 76CM X 300CM

IMPORTANT:

the film must be separated from its transparent protective layer this is best done with 2 small pieces of scotch/adhesive tape/ sticked on both sides of one of the corners of the film and this will reveal its adhesive side, please apply it on your window with plenty of soapy water on the glass, then press with the plastic tool (to avoid scratching the film please do not press too hard with the plastic tool or better wrap it in some cloth). Thanks

• SILVER/CHROME REFLECTIVE TINT FILM

SUPPLIED WITH OUR KITS:

-FITTING TOOL

-PLASTIC SQUEEGEE

FITTING INSTRUCTION:

1. Clean window inside and out with soapy water. NO AMMONIA

2. Cut film pattern on outside of glass. LINEAR SHOULD FACE OUTSIDE

3. Trim film to fit on outside of window

4. Spray a light film of water on glass and film

5. Peel film apart from backing on inside of window. Use two pieces of transparent tape to separate film from liner

6. Spray adhesive with soapy water solution

7. Place film on INSIDE of window

8. Spray film with soapy water solution and squeegee firmly

9. Trim film with new fitting tool, leaving 1/16” gap around edges

10. Spray film with soapy water solution and squeegee firmly

11. Drying time 3 days in full sun