1.Transmitter

Channel: 2 CH

Remote Control Distance: 50 meter(open/ideal) in theory, 15%-50% in reality(In open environment,receiver antenna outside the box)

Encode: Fixed code, soldering

Frequency:315 or 433 MHz

Size: 68mm x 48mm x 15mm

Power Supply: 1 X 12V/23A 

2.Control Mode:

Control Types:

Toggle/Self-Lock: Press->On; Press again->Off

press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).

Latched/Inter-Lock: Press->On; Press other button->Off

press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).

Momentary/Jog: Press and hold->On; Release->Off

Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )

(Factory Original Setting is  Momentary,pls Choose the function,or Change it by yourself.)

Decode: Learning code

Power Supply (Operating Voltage): DC 12V

Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC

Work Voltage Range of Relay: AC 110-240V or DC 0-28V (Not receiver)

sensitivity:-105 dBm

Operating Temperature:-40'C~+80'C

3.Learn code and Remove Code

1. Learn:press the learning code .the indicator from  on to  off ,loosen your finger ,press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .it can learn more than 12 PCS 2260/2262/1527 chip with the different code wireless remote control.

2.Remove :press the learning button about 8 seconds , the indicator turn on to off , it means the Code had been removed successfully.

 

2 x Transmitter (Battery include)

1 x Receiver