.jpg)
Specification
- Operating voltage: DC12V
- Storage: 2000 users
- Card type: 13.56MHz IC card (Can't support HID, Cobra, APCiK, etc)
- Card reading distance: 1-15cm / 0.39-5.91"
- Operating current: <100mA
- Dimensions: 86mmx45mmx12mm / 3.39"x1.77"x0.47"
- Weight: 80g / 0.18lb
- Relative humidity: 20%~80%
- Storage: 2000 users
- Microcontroller chip: STC
How to SET Manager Card-MAC&MDC
- Step 1: Turn off power and connect bin 2&3 of S1
- Step 2: Turn on power and buzzer gives 3 long buzz with green light flash fast, now read two empty cards first one as Manager Add Card and Second one as Manager Delete Card with red light flashing
- Step 3: Turn off power, disconnect bin2&3 and connect bin 1&2 of S1
- Step 4: Turn on power again
How to use Manager Card-MAC&MDC
- To add a card user in standby mode: read MAC/read new cards/read MAC
- To delete a card user in standby mode: read MDC/read registered cards/read MDC
- To delete all users in standby mode: read MDC/read MAC/read MDC
- Remark: User cards can be added or deleted continuously
How to change Open time
- Connect bin 1&2 of S2 : Open time is 5 Secs
- Connect bin 2&3 of S2 : Open time is 1 Secs
Package
- 1 x IC RFID Embedded Access Control Controller Module PCB