※Please specify what voltage you need when ordering.
| range |
TeSys |
| product name |
TeSys D |
| product or component type |
Contactor |
| device short name |
LC1D |
| contactor application |
Motor control Resistive load |
| utilisation category |
AC-1 AC-3 AC-4 |
| poles description |
3P |
| pole contact composition |
3 NO |
| [Ue] rated operational voltage |
Power circuit: <= 300 V DC Power circuit: <= 690 V AC 25...400 Hz |
| [Ie] rated operational current |
9 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit |
| motor power kW |
2.2 kW at 220...230 V AC 50/60 Hz (AC-3) 2.2 kW at 400 V AC 50/60 Hz (AC-4) 4 kW at 380...400 V AC 50/60 Hz (AC-3) 4 kW at 415...440 V AC 50/60 Hz (AC-3) 5.5 kW at 500 V AC 50/60 Hz (AC-3) 5.5 kW at 660...690 V AC 50/60 Hz (AC-3) |
| motor power HP (UL / CSA) | 0.33 hp at 115 V AC 50/60 Hz for 1 phase motors 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors 2 hp at 200/208 V AC 50/60 Hz for 3 phases motors 2 hp at 230/240 V AC 50/60 Hz for 3 phases motors 5 hp at 460/480 V AC 50/60 Hz for 3 phases motors 7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors |
| control circuit type |
AC 50/60 Hz |
| control circuit voltage |
220 V AC 50/60 Hz |
| auxiliary contact composition |
1 NO + 1 NC |
| [Uimp] rated impulse withstand voltage |
6 kV conforming to IEC 60947 |
| overvoltage category |
III |
| [Ith] conventional free air thermal current |
10 A (at 60 °C) for signalling circuit 25 A (at 60 °C) for power circuit |
| Irms rated making capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 250 A at 440 V for power circuit conforming to IEC 60947 |
| rated breaking capacity |
250 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current |
100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 140 A - 100 ms for signalling circuit 30 A 40 °C - 10 min for power circuit 61 A 40 °C - 1 min for power circuit 105 A 40 °C - 10 s for power circuit 210 A 40 °C - 1 s for power circuit |
| associated fuse rating |
25 A gG at <= 690 V coordination type 1 for power circuit 20 A gG at <= 690 V coordination type 2 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 |
| average impedance |
2.5 mOhm - Ith 25 A 50 Hz for power circuit |
| [Ui] rated insulation voltage |
Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Power circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 600 V CSA certified Signalling circuit: 600 V UL certified Signalling circuit: 690 V conforming to IEC 60947-1 |
| electrical durability | 0.6 Mcycles 25 A AC-1 at Ue <= 440 V 2 Mcycles 9 A AC-3 at Ue <= 440 V |
| power dissipation per pole |
1.56 W AC-1 0.2 W AC-3 |
| Front cover |
With |
| mounting support |
Rail Plate |
| standards |
CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
| product certifications |
BV CCC CSA DNV GL GOST LROS (Lloyds register of shipping) RINA UL |
| connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Power circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Power circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Power circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Power circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end |
| tightening torque |
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm |
| operating time |
12...22 ms closing 4...19 ms opening |
| safety reliability level |
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| mechanical durability |
15 Mcycles |
| operating rate |
3600 cyc/h at <= 140 °F (60 °C) |
| coil technology |
Without built-in suppressor module |
| control circuit voltage limits | 0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz |
| inrush power in VA |
70 VA at 68 °F (20 °C) (cos ϕ 0.75) 60 Hz 70 VA at 68 °F (20 °C) (cos ϕ 0.75) 50 Hz |
| hold-in power consumption in VA |
7.5 VA at 68 °F (20 °C) (cos ϕ 0.3) 60 Hz 7 VA at 68 °F (20 °C) (cos ϕ 0.3) 50 Hz |
| heat dissipation |
2...3 W at 50/60 Hz |
| auxiliary contacts type |
Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 Type mirror contact (1 NC) conforming to IEC 60947-4-1 |
| signalling circuit frequency |
25...400 Hz |
| minimum switching current |
5 mA signalling circuit |
| minimum switching voltage |
17 V signalling circuit |
| non-overlap time |
1.5 ms on de-energisation (between NC and NO contact) 1.5 ms on energisation (between NC and NO contact) |
| insulation resistance |
> 10 MOhm signalling circuit |
| motor power range | 1.1…2 kW at 200…240 V 3 phases 2.2…3 kW at 380…440 V 3 phases 4…6 kW at 380…440 V 3 phases 4…6 kW at 480…500 V 3 phases |
| motor starter type |
Direct on-line contactor |
| contactor coil voltage |
220 V AC |
| IP degree of protection |
IP20 front face conforming to IEC 60529 |
| protective treatment |
TH conforming to IEC 60068-2-30 |
| pollution degree |
3 |
| ambient air temperature for operation |
-40...60 °C |
| ambient air temperature for storage |
-60...80 °C |
| fire resistance |
1562 °F (850 °C) conforming to IEC 60695-2-1 |
| flame retardance |
V1 conforming to UL 94 |
| mechanical robustness |
Shocks contactor closed: 15 Gn for 11 ms Shocks contactor open: 10 Gn for 11 ms Vibrations contactor closed: 4 Gn, 5...300 Hz Vibrations contactor open: 2 Gn, 5...300 Hz |
| height |
77 mm |
| width |
45 mm |
| depth |
86 mm |
| product weight |
0.32 kg |
You can pick up from Fullerton, California or Piscataway, New Jersey or we will ship via UPS Ground.
Contact us for exact shipping cost.
Payment
Supra Machine Tool accepts: PayPal, Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. (Please send payment to 2320 E Valencia Dr Fullerton, CA 92831) All payments must be received within 7 business days. All buyers residing in California add 8.75% sales tax.
Shipping and Handling
Buyer pays the Shipping charge based on USPS Priority Mail or UPS Ground Shipping Charges. Orders being shipped to P.O. Boxes will be delivered by United States Postal Services (USPS). Note: Weight restrictions may apply in some cases. Orders under 150 lbs. can be shipped by U.P.S., freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. International buyer pays the actual shipping charge + $5.50-$7.50 handling fees. International shipments of 150 lbs or more can be made by UPS International. Buyers are responsible for payment of all Shipping and Handling charges on all items.
Terms and Conditions
We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with eBay. Thank you for viewing. Supra Machine Tool appreciates your business very much.