3Com AirConnect 9550 11n 2.4+5GHz PoE Wireless Access Point

Model: WL-605 - P/N: 3CRWE955075 - Not Include Antenna

DESCRIPTION
The 3Com WL-605 dual-radio access point has both 2.4 and 5 GHz 802.11n radios allowing it to support simultaneous 2.4 GHz 11b/g/n and 5 GHz 11a/n wireless connections. Advanced MIMO technology provides enhanced wireless range and coverage area for improved roaming and ubiquity. This access point is powered using a single, standard IEEE 802.3af PoE connection, eliminating the need for proprietary PoE injectors or bulky and inefficient external power supplies. The WL-605 is offered in a fat and fit versions: In the fat version, the AP is a stand-alone device and can be managed via the Web interface, the CLI/Telnet interface, IMC (3Com’s intelligent Management Center) or any SNMP Management station. This fat access point can also be upgraded to work as a fit AP via a simple conversion command and software upgrade. As a fit AP, the WL-605 can be managed via a 3Com WX 3000, WX 5000 or wireless controller modules for selected 3Com chassis to get all the features that high end enterprise customers are looking for.

SPECIFICATION

· WAN ports

 0

· LAN ports

 1

· LAN ports type

 10/100/1000 Gigabit Ethernet (RJ-45)

· LAN ports auto cross-over

 Yes

· DHCP server

 Yes

· DHCP client

 Yes

· QoS

 Yes

· Routing Protocols

 VLAN tagging (802.1q), IGMP Multicast (RFC 1112)

· Maximum Wireless Speed

 300 Mbps

· WiFi standards supported

 802.11a (54 Mbps)
802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n

· Wifi security/authentication

 WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering

· WiFi modes

 Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)

· Internal antenna(s)

 3

· External antenna(s)

 3

· Antenna connector

 RP-SMA (Reverse SMA)

· Multiple SSID

 Yes

· WDS compatible

 Yes

· WMM (QoS)

 Yes

· Dual Band (2.4GHz/5GHz)

 Yes

· Simultaneous Dual Band (2.4GHz/5GHz)

 Yes

· SNMP support

 SNMP v.1, SNMP v.2, SNMP v.3

· Power over Ethernet (PoE)

 Yes

· Notes

 This AP features an additional auto-negotiating RJ-45 console port.

SHIPPING & HANDLING:
  • Any insurance is the responsibility of the buyer, as we will not be held liable for and theft, loss or damage occurred during transit.
  • Please allow 1 business day for processing your payment. Item will be sent through Australia Post.
  • Shipping of goods will only be processed upon receipt or clearance of funds.
  • We are not responsible for any delay caused by the shipping company; however we will assist the purchase in relation to any delay.
  • We reserve the right to ship via Courier or Australia post; if particular method of shipping is required please contact us.
  • Delivery times are only estimates. There may be additional delays due to some unexpected reasons, which are beyond our control.

SALE INFORMATION:
  • All Specs are taken from the manufactures/third party websites. They are subject to change without notice.
  • Positive feedback will be left for all transactions after feedback is left for us. Please contact us before leaving negative feedback as in most situations a solution can be reached.

INTERNATIONAL SHIPMENT:
  • Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
  • Please check with your country's customs office to determine what these additional costs will be prior to bidding / buying.

SALE TERMS & CONDITIONS:

Warranty and Dead on Arrival (DoA) Conditions

Any new and sealed item found to be faulty which carries a manufacturers warranty is to be taken up with the manufacturer. If this item carries a manufacturers guarantee it should be noted above.

When no manufacturers warranty covers a new and sealed/unsealed item we provide a ONE WEEK GUARANTEE with us, notify us before that time elapses for a DOA refund on return of item, Postage is not refundable. If damaged in post buyer needs to make a claim on the postage insurance which will recover shipping. All items will be tested upon arrival and will attract a handling fee of $15 plus return postage to user if found to be in perfect working condition.

Warranty does not cover physical damage resulting from abuse and misuse.

As part of warranty procedure the seller may at its own discretion replace the faulty part with equivalent or better part.

Cost of shipment is responsibility of the buyer.

Return Item Conditions

Under most circumstances, return of the item is not accept for change of mind or wrong decision made (including compatibility issue). Every effort has been made to ensure the description and specification of the item is as accurate as possible, in most of the cases the details are provided by the manufacturer. Please read the descriptions and specifications carefully before you make your purchase and feel free to contact us regarding any questions. In the rare case of returns due to error in listing, we will gladly refund the full amount of the price of the item when the item is sent back to us in its original packaging and state. However, postage cost to and from are charges for delivery carrier, therefore cannot be refunded.

THANKS FOR LOOKING !