Accurate tyre pressure gauge with clear easy to read 2" analogue
dial face. Maximum 60 psi for more precise results, suitable for cars, motorbikes, vans, trailers, bicycles,
karts or any tyre with a Schrader valve
Pressure bleed/hold button
allows the user to operate the gauge more easily at the valve, taking
a reading without having to juggle the gauge into a visible position
while holding it to the valve. Simply press the chuck onto the valve,
the pressure reading is held in the gauge, note the pressure, then
release the air with the button as you require. Bleed button can be used to release air and view the actual pressure drop for precise settings
The large clear gauge face is
50mm/2'' diameter with a white background, black digits and needle,
viewed through a clear window. The rugged steel body is protected
with a rubber boot. The flexible
hose and chuck allows access to recessed valves in deep wheels
or wheels with difficult access. For easy use the flexible black rubber hose is
280mm in length, with 360 degree swivel at the gauge end and at the
valve chuck end, total length of the hose from gauge to valve is
375mm. For use on Schrader valves fitted as standard by all car
and motorcycle manufacturers around the world.
Gauge
usage Notes: