- Motor speed
- Current limit/regenerative current limit
- Acceleration/deceleration limit
- Turn ON/OFF minimum and turn ON/OFF maximum voltage levels for example turn off the unit at low battery voltage
- Heatsink and Motherboard temperatures
- Supply voltage
- Potentiometer input voltage (you can use this input for an analoge measurement input if you are controlling the speed with RS232/485 commands )
- Output current
- Input frequency on PWM input
- Input duty on PWM input
- I x R compensation (this if for speed regulation compensation the load drop voltage)
- Top output voltage / supply compensation (maximum speed limit) (this can be very usefull in more cases. As you give a maximum reference voltage (maximum RPM) what the output can be with the maximum gas setting. This value becomes a reference voltage and archive perfect supply voltage compensation. This means if your supply voltage drops of raise your motor PRM remains the same. Using the supply compensation and the I x R compensation together you can archive perfect speed regulation without any closed loop feedback and no tachogenerator is needed.
- Status register
- Configuration bits
- Adjustable serial address controlling more controllers on one line.
- Current calibration register
For more information and how to use the serial communication please read the datasheet with the controll registers.
Why our controllers?
There are many type of controllers the most piece is a chinese simple and cheap controller. They are great until you put a large load to theirs output.
-Those controllers does not have proper supply filteringwith many capacitors what is very important! Without it the most of the chinese controller regularly burning down.
-They does not have proper freewheele diode system against the motor inductive current!
-The most of them does not have any current limit or thermal limit function which is very important to protect the motor and the controller as well.
-Most of tham has only one way to use with just a potentiometer to change the output voltage. No acceletartion limit, no regeneration function, no serial communication or other special controlling mode.
These controllers has all in one functions and we keep depevoling the units if any other request or market demand occurs!
How to use these controllers?
If you want you can set acceleration limits, voltage turn ON/OFF points, regenerations modes.
Also if you want you can use serial communication or PWM as a controll mode. Functionas are higly flexible.
With the current limit potentiometer you can very fine adjust the current what the motor can maximum consumes.
After this your motor and PWM driver is fully protected against the burning down or overload.
Additional protection is the temperature protection. The controller measures the temperature of heatsink. If that exceeds the maximum the controller will shut down.
Do we have different kind of controllers?
Yes we have!
In different power levels. Only one way drive or H-bridge reversible version.
Normal or low ultta high efficiency low frequecy drives.
Some of tham available in different version only board, heatsinked in case.
Please check our store here:
Does it come with warranty what if you need help?
Yes. We test each controllers before shipping. If there is a problem it has 6 months warranty. If you have problem or question please feel free to contact. For installation you can find many informations in the datasheet which is available in the ad there is a download link in the desctription.
Do you have questions or do you need large qantity better price etc?
Please contact for details.
Shipping time were it comes from?
We ship from EU-Hungary. Europien shipping time manly takes 3-6 working days. Wordwide shipping time 8-12 working days.
Handling time 2-3 days.