Model DP-2000

3” Orbital Polisher 10 MM Throw

What’s included in the box:

· 1x Polisher

· 1x 3” backing plate

· 1x backing plate removal tool

· 1x set of carbon brushes

· 2x spare screws.

Product Features

Perfect construction

DP-2000 is fully covered with non-slip rubber material, so it is easy to approach the parts which are difficult to touch during construction. Thus, the builder can achieve the most ideal effect.

Switch lock

it can help builder to control the machine perfectly.

Great flexibility

Detailing work can also be carried out in many small areas because of its small bottom tray.

Automatic speed controller

The speed gear control component is very practical and easy to use and It can also easily change the speed directly when the polishing machine is running.

Humanization design

The ventilation and heat dissipation distributed in the polishing parts can effectively improve the heating problem of the machine or the paint surface during the construction.

Evolution of polishing machine

Model DP-2000 Dual Action Polisher has been used new technology, which can reduce construction time and do not produce swirl marks on pain surface. This new model polishing machine make polishing work simple and perfect.

Convenient use

The DP-2000 using unique design and ergonomic principles, this sander has perfect balance combined with vibration-free construction which maximize the flexibility of the polishing machine. And it is easily to construct contour curve, edge and corner. Meanwhile, it can also guarantee the greatest convenience and comfort of auto beautician. DP-2000 make polishing simple and convenient!

Energy efficiency

TACSYSTEM attach great importance to energy conservation and environmental protection. So DP-2000 works at 500 watts.

Guarantee

1. Accurate torque control

2. Automatic safety switch can make sure the safe and reliable operation. The polishing machine will not start automatically, when the power is suddenly cut off and on again.

3. The current blocking device cuts off the motor when it is overloaded to protect operator.