10A/20A/30A PWM Solar Panel Controller Charge Regulator 12V/24V Auto With USB
SAFETY INSTRUCTIONS
1. Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2. The battery cable should be as short as possible to minimize loss.
3. The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL
it is not suited for nickel metal hydride, lithium ions or other batteries.
4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
1. Build-in industrial micro controller.
2. Big LCD display,with 5V USB charger
3. PWM charge management.
4. Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5. Dual mosfet Reverse current protection ,low heat production.
1. Connect the battery to the charge regulator - plus and minus.
2. Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
DISPLAY
Display the battery voltage |
|
This iron will be on when solar panel voltage is higher than battery voltage,and it will start charging. |
|
Battery power iron |
|
If this iron flashes means the battery voltage is too low and the output will be cut off until the battery voltage raise to 12.6V |
|
Iron on means output is good. |
TECHNICAL PARAMETER
MODEL |
RTD1210 |
RTD1220 |
RTD1230 |
RTD4810 |
RLD4820 |
Batt voltage |
12V/24V auto |
48V |
|||
Charge current |
10A |
20A |
30A |
10A |
20A |
Discharge current |
10A |
20A |
30A |
10A |
20A |
Max Solar input |
<50V |
<80V |
|||
Bulk charge |
14.5V |
||||
Float charge |
13.7V |
||||
Discharge stop |
10.7V |
||||
Discharge reconnect |
12.6V |
||||
USB output |
5V/0.8A |
||||
Self-consume |
<10mA |
||||
Control mode |
PWM |
||||
Operating temperature |
-35~+60 °C |
||||
Size/Weight |
150*78*35mm /150g |
*all red color voltage X2 ,X4 while using 24V /48V system.
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you contact us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!