Item Type: Adapter Fitting - Male JIC X Code 62 Flange
Nominal Size: 1-1/2 Male JIC X 2 Code 62 Flange
Material: Plated Steel
| JIC THREAD CHART - THREAD SIZE MEASUREMENT TAKEN FROM OUTSIDE DIAMETER OF MALE THREADS |
JIC 37 degree flare fittings form a metal on metal seal on a 37 degree cone. Thread pitch is the same as SAE 45 degree flare in most sizes and some female assemblies have a dual 37/45 degree seat for this purpose. Size 6 and size 12 do not cross over. Tube Size (NOMINAL SIZE)
| Dash Size
| Thread Size
|
|---|
1/8"
| - 2
| 5/16" - 24
| 3/16"
| - 3
| 3/8" - 24
| 1/4"
| - 4
| 7/16" - 20
| 5/16"
| - 5
| 1/2" - 20
| 3/8"
| - 6
| 9/16" - 18
| 1/2"
| - 8
| 3/4" - 16
| 5/8"
| - 10
| 7/8" - 14
| 3/4"
| - 12
| 1-1/16" - 12
| 7/8"
| - 14
| 1-3/16" - 12
| 1"
| - 16
| 1-5/16" - 12
| 1-1/4"
| - 20
| 1-5/8" - 12
| 1-1/2"
| - 24
| 1-7/8" - 12
| 2"
| - 32
| 2-1/2" - 12
|
|
| CODE 62 FLANGE SIZE CHART - OUTSIDE DIAMETERS AND THICKNESSES OF FLANGES |
4-Bolt Flange fittins, also known as split flange or full flange fittings are used for a large variety of applicaitons. They are seen in suction, low pressure, and high pressure applicaitons. The SAE standard (J518) fittings include Code 61 and Code 62 type fittings. Though common on Caterpillar the CAT flange fitting is not an SAE recognized fitting. Additionally, the Komatsu flange fitting, which one might call a Code 61 #10 fitting is not an SAE fitting either.Nominal Size
| Dash Size
| Diameter
| Thickness | O-Ring |
|---|
1/2"
| - 8
| 1.250" (31.75mm)
| .305" (7.75mm)
| 2-210/N9
| 3/4"
| - 12
| 1.625" (41.28mm)
| .345 (8.76mm)
| 2-214/N9
| 1"
| - 16
| 1.875" (47.63mm)
| .375" (9.53mm)
| 2-219/N9
| 1-1/4"
| - 20
| 2.125" (53.98mm)
| .405" (10.29mm) | 2-222/N9
| 1-1/2"
| - 24
| 2.5" (63.50mm)
| .495" (12.57mm) | 2-225/N9
| 2"
| - 32
| 3.125" (79.38mm)
| .495" (12.57mm)
| 2-228/N9
|
|