Item Type: Adapter Fitting - Female Pipe X Female JIC 90 Elbow
Nominal Size: 3/8 Female Pipe X 3/8 Female JIC 90 Elbow
Material: Plated Steel

JIC THREAD CHART - THREAD SIZE MEASUREMENT TAKEN FROM OUTSIDE DIAMETER OF MALE THREADS
JIC 37 degree flare fittings form a metal on metal seal on a 37 degree cone.  Thread pitch is the same as SAE 45 degree flare in most sizes and some female assemblies have a dual 37/45 degree seat for this purpose.  Size 6 and size 12 do not cross over.
 Tube Size (NOMINAL SIZE) 
 Dash Size 
 Thread Size 
1/8"
- 2
5/16" - 24
3/16"
- 3
3/8" - 24
1/4"
- 4
7/16" - 20
5/16"
- 5
1/2" - 20
3/8"
- 6
9/16" - 18
1/2"
- 8
3/4" - 16
5/8"
- 10
7/8" - 14
3/4"
- 12
1-1/16" - 12
7/8"
- 14
1-3/16" - 12
1"
- 16
1-5/16" - 12
1-1/4"
- 20
1-5/8" - 12
1-1/2"
- 24
1-7/8" - 12
2"
- 32
2-1/2" - 12


NPTF (PIPE) THREAD CHART - THREAD SIZE MEASUREMENT TAKEN FROM OUTSIDE DIAMETER OF MALE THREADS
Dryseal American Standard Taper Pipe Thread (NPTF) which is usually reffered to as just pipe thread or tapered pipe thread seals in one of two ways.  The first method is interferance between the threads on the male and female connectors - a thread sealant is typically used in this application.  The second method is 30° inverted flare on the nose of the fitting.  This is typically used when connecting a male connector to a female swivel connector.  In this application thread sealant is not used.
 Dash Size 
 Nominal Size 
 Thread Size 
- 2
1/8"
.405" - 27
- 4
1/4"
.540" - 18
- 6
3/8"
.675" - 18
- 8
1/2"
.840" - 14
- 12
3/4"
1.050" - 14
- 16
1"
1.315" - 11.5
- 20
1-1/4"
1.660" - 11.5
- 24
1-1/2"
1.900" - 11.5
- 32
2"
2.375" - 11.5