Specification:

1.Transmitter

Operating Voltage: DC12V

Operating Current: 30MA

Operating Frequency:   315MHz

Frequency Distance: 50 meter(open/ideal) in theory, 15%-50% in reality(In open environment,receiver antenna outside the box)

Encode: Fixed code, Soldering

2.Receiver

Channel: 1CH

Decode: Learning code

Working Voltage: AC110V/ 220V (180V-240V)

Output way: Momentary Toggle Latched Adjustable

Maximum Load Current: 10A

Rated load:10A 220V

Receiver Sensitivity: -105dBm

Working temperature :  -40\'C - +80\'C

Size : 55*30*18mm

Working/output way:

 The work model you can change it in work pin.

 Jog/Non-Latched:  Press one button is Working /ON.  Loosen your finger on the same button is   Stop/OFF.  One channel switch need one buttons remote control.

 Self -lock/Self-Latched:  Press one button for one time is working/ON.  Press the same button again   is stop/OFF.  One channel switch need one buttons remote control. 

 Inter-lock /Latched:  Press one button is working/ON, press another button is stop/OFF.  One channel   switch need 2 buttons remote control.

 Work model Set:

  1. Self -lock/Self-Latched: P2+P3 Connect to the Pin

  2.Inter-lock /Latched:P1+P2 connect to the Pin

   3.Jog/(momentary): P1 P2 P3 all not connect

Learning method(we have compatible it after send to you) :

Input AC220/110V for the Receiver. press the Learning Button until the Led indicator ON. Then press transmitter(controller button) , the Led indicator flash fast, it mean learning successfully.Test the relay. press the remote control button,on or off,the relay will be on and off,you can listen it.

Clearing Code:

Keeping press the learning Button on the receiver until the Led indicator ON and flash fast(about 4-5 seconds), it mean the code have been cleared successfully.

 Please notice that :

we will ship to you as default " Self lock".  I t can be changed by Welding Spot by Soldering or Work way pin.

Packing list:

2 x Receiver Switch

 1X Wall on/off transmitter(Battery include)