Ruby Electronics DT-9989 True RMS Industrial Multimeter Oscilloscope with Color LCD Display NEW!! 

a Product Description

This is a brand new CEM DT-9989  certified digital multimeter Oscilloscope with Color TFT display from Ruby Electronics.  This meter Offers fast A/D conversion, high accuracy, built-in datalogger and auto trigger function.   DT-9989 measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycles.  It can also perform diode test, insulation test, temperature measurement, data store and recall.  This meter features waterproof, rugged design for heavy duty uses.   *** This device is to be used by trainED STAFFS.  All safety regulation should be observed when testing high power circuits. ***

Features

Easy to access push buttons to compliment the rotary switch for function selection, cursor, hold and range selection 3.5" color TFT-LCD display with 320 x 240 resolution DC voltage measurement, AC voltage measurement, AC dBV measurement, AC low pass filter, DC/AC mV measurement, temperature measurement, frequency measurement, resistance measurement, continuity measurement, diode test, capacitance measurement, DC/AC current measurement, AC+DC simultaneous display and data storage. 0 - 10 MHz oscilloscope function Double molded waterproof enclosure 6.5 ft (2-meter) drop test 7.4V Li-ion rechargeable battery

Specification

Meter Functions	Range	Resolution		Basic Accuracy
DC Voltage	50mV - 1000V	0.001mv - 0.1V		+/- (0.05% + 20) to (0.1% + 5)
AC Voltage	50mV - 1000V	0.001mv - 0.1V		+/- (0.3% + 25) to (3% + 25)
(AC+DC)  Voltage	50mV - 1000V	0.001mv - 0.1V		+/- (1% + 25) to (3.5% + 25)
DC Current	500 uA to 10A	0.01 uA to 0.001A		+/- (0.1% + 20) to (0.3% + 20)
AC Current	500 uA to 10A	0.01 uA to 0.001A		+/- (0.6% + 25) to (3% + 25)
(AC+DC) Current	500 uA to 10A	0.01 uA to 0.001A		+/- (1% + 25) to (1.5% + 40)
Resistance	50 Ohm - 50 M Ohm	0.001 Ohm - 0.001 M Ohm		+/- (0.5% + 20) to (2% + 20)
Capacitance	5 nF - 10 mF	0.001 nF - 0.01 mF		+/- (2% + 40) to (5% + 40)
Frequency (electronic)	50 Hz -  10 MHz	0.001 Hz - 0.001 MHz		+/- (0.01% + 10)
Frequency (electrical)	40 Hz -  10 KHz	0.01 Hz - 0.001 KHz		+/- 0.5%
Temperature (type-K)	-50 deg C - 1000 deg C -58 deg F - 1832 deg F	0.1 deg C 0.1 deg F		+/- (1.0% + 2.5 deg C) +/- (1.0% + 4.5 deg F)

Oscilloscope Functions	Main Specification	Format or notes
LCD display	3.5" color TFT-LCD ; 320 x 240 pixels
Refresh rate	15 - 50 V/S	Fast / Slow
Bandwidth	10 MHz	0 - 10 MHz
Input	Coupling, AC, DC	AC, DC
Input impedance	1 MOhm +/- 2%  ;  15pf +/- 2pF
Max input Voltage	1000V  ;  600V (DC+AC peak value, 1 MOhm input impedance)	CAT I, CAT II, CAT III
Probe attenuation	1X
Sampling mode	Real time sampling ; Random sampling	Single channel 3K
Real time sample rate	50 MSamples/Sec about 500 points
Sampling resolution	8 bits
Record length	3K / 10 pages	SRAM
Storage length	10 Charts	EEPROM
Time error	+/- 5 sec / 24 hours
FFT collect	4 - 256 points
Bluetooth transmission range	9600 baud rate
Li-ion battery	7.4 V ; 2400 mAH

Photos

Click image to enlarge

Policy Summary

Product Condition	New, guaranteed to work
Manufacturer's Warranty	1 year	Under normal use; replace, repair or refund at manufacturer's sole discretion
Seller's Warranty	30 days	Under normal use; replace, repair or refund at seller's sole discretion
US continental shipping and handling	Expedited shipping to US location	Non-refundable
Payment	Please contact seller for payment option	Due 3 days after auction close

ALL PURCHASES ARE SUBJECT TO ADDRESS VERIFICATION. 

We ship to CONFIRMED ADDRESS ONLY. 

More store policies

Copyright © 2014-2019 Ruby Electronics. All rights reserved.