eBay

AccuSpark Electronic Distributors

Suitable MGB 1962 -1974 1800cc All Years ( negative earth only )
See other listings for 1975-1982 with Blue ballast Coil

Ignition Pack
you get

Our Brand new 45D Lucas type electronic Distributor fitted with Stealth Module
One set of 5 AccuSpark 8.mm red ignition leads

4 AccuSpark triple ground copper core Titanium coated Plugs

1 genuine AccuSpark Red Rotor
1 AccuSpark performance red 3 Ohm Coil 12 Volt Non Ballast

negative earth only

The AccuSpark™ MGB Distributor comes ready fitted with the AccuSpark electronic ignition module .

This is a quality item and we have fitted dozens of units in our own workshop
This gives excellent all round performance with notable gains
The Hall effect trigger and module give better spark voltage improving starting , tick over , and MPG .
The Lucas 45D4 body offers a number of improvements over the old 25d Models
Solid mounting area prevents crushing when the mounting ring is tightened
A longer rotor arm allows greater spacing of ignition wires that helps prevent arcing
an improved cam profile ( only relevant when points fitted )
This is a good as other systems costing between 3 and 6 times as much .

Developed and designed Based on original Lucas Design

Recently manufactured rotor arms have been failing due to poor design and cheap materials.
Notably the rivet which holds the brass inlay into the molding has proved to be a unreliable method of construction.
The high tension current, averaging 30,000 volts, is always looking for the easiest route to earth and shorts down through the rivet,

Based on the original, more reliable 1960’s design,
but made from modern engineering grade polypropylene
with the latest manufacturing techniques to high tolerances.

These LUCAS STYLE RED ROTOR ARMS will not let you down.

The brass contact is inlaid to dispense with the troublesome rivet used on most versions, this rivet can run very close to the centre cam and is known to cause failure by short circuiting.

The superior insulation of the body makes them suitable for use with Electronic ignitions and high output coils

The new spring steel clip, in conjunction with a revised high manufacture tolerance assures a really good fit,