TYAN Thunder K8S Pro S2882

• Based on the AMD Opteron™ 64-bit architecture, the Thunder K8S Pro (S2882) is a powerful and stable server platform for today's demanding performance requirements.
• Thunder K8S Pro (S2882) is a specially designed platform with competitive features such as eight DIMM slots for 16GB of excellent memory performance, IPMI compliant server management support, and Gigabit Ethernet/Fast Ethernet LAN ports for powerful broadband connectivity. The Thunder K8S Pro (S2882) is ideal choice for 1U and 2U server environments.
• Processor 
• • Dual µPGA 940-pin ZIF sockets
• • Supports up to two AMD Opteron™ processors
• • Two onboard 3-phase VRMs
• • 128-bit DDR dual-channel memory controller
• (integrated in CPU)
• Chipset 
• • AMD-8131™ HyperTransport™ PCI-X Tunnel
• • AMD-8111™ HyperTransport™ I/O Hub
• • Winbond™ W83627HF Super I/O ASIC
• • Analog Devices ADM1027 Hardware Monitoring IC
• Memory 
• • 128-bit DDR memory bus
• • Eight 184-pin 2.5-Volt DDR DIMM sockets
• - each CPU controls four
• • Supports up to 16GB of Registered DDR
• • Supports ECC type memory modules
• • Supports PC3200 / 2700 / 2100 / 1600 DDR
• Expansion Slots (Total of five usable slots)
• • Two independent PCI-X buses
• • PCI-X bridge A supports 64-bit 133/100/66/33
• MHz with two 3.3V PCI-X slots
• (one with ZCR support - option)
• • PCI-X bridge B supports 64-bit 133/100/66/33
• MHz with two 3.3V PCI-X slots
• • One legacy 32-bit 33 MHz (5V) PCI slot
• Back Panel I/O Ports 
• • Stacked PS/2 mouse and keyboard ports
• • Stacked two USB v1.1 ports + 1 RJ45 10/100
• Base-T port w/ activity LED
• • Two 9-pin UART serial ports
• • One 15-pin VGA port
• • Two RJ45 10/100/1000 Base-T ports with 
• activity LED
• Integrated I/O 
• • One floppy connector supports up to two drives
• • One 9-pin serial ports connector
• • One 25-pin parallel port connector
• • Four USB v1.1 ports
• • Three front panel LAN activity LED connectors
• System Management 
• • Seven 3-pin fan headers with tachometer
• monitoring
• • Five fan headers with (PWM) speed control
• • One 2-pin Chassis Intrusion header
• • Temperature, voltage and fan monitoring
• Integrated Enhanced IDE Controller 
• • Dual IDE channels supports up to four EIDE
• devices
• • Supports for UDMA 33/66/100/133 IDE drives
• and ATAPI compliant devices
• Integrated PCI Graphics 
• • ATI® RAGE™ XL PCI graphics controller
• • 8MB Frame Buffer of video memory
• Integrated LAN Controllers 
• • Broadcom BCM5704C dual-channel GbE
• - Two RJ-45 LAN connectors with LEDs
• - Connected to PCI-X Bridge A
• • Intel 82551QM 10/100 LOM
• - Operating at 32-bit/33MHz PCI bus
• Integrated SATA Controller 
• • Silicon Image Sil 3114 SATA controller
• • Supports four-ch, SATA RAID (RAID 0, 1, 0+1)
• • Total of four 7-pin SATA 1.0 connectors
• • Supports up to four Serial ATA150 drives
• • Connected to legacy 32-bit 33MHz PCI bus
• Integrated Dual Channel SCSI (option)
• • Adaptec AIC-7902W Ultra 320 
• SCSI controller
• • Connects to PCI-X Bridge A
• • Adaptec® zero-channel RAID technology support
• Intelligent Platform Management Interface Header 
• • TYAN Server Management Daughter card 
• (optional) supports features listed below via 
• IPMI header (SMDC/TSO Support)
• • QLogic™ Zircon Baseboard Management
• Controller (BMC)
• • Tailored for IPMI highest 1.5 Spec.
• • Supports KCS and BT styles
• • Flexible Windows/Linux Management Solution
• • Supports RMCP and SNMP protocols
• • Supports ASF standard and EMP
• • I2C serial multi-master controllers and UARTs
• • Build-in IPMB connector
• • Remote power on/off and reset support 
• (IPMI-over-LAN)
• BIOS 
• • AMI® BIOS 8.0 on 4Mbit LPC Flash ROM
• • Supports APM 1.2 & ACPI 1.0 
• • Power Management S1, S4, and S5 support
• Form Factor 
• • Extended ATX footprint
• (13" x 12", 304.8x330.2mm)
• • EPS12V (24pin + 8pin) power connectors
• Regulatory ( download)
• • FCC Class B (Declaration of Conformity)
• • CE (Declaration of Conformity).
• Link do strony producenta:
• http://www.tyan.com/archive/products/html/thunderk8w.html